Fix and Furrow
Advertise

Professional Christmas Light Installation Cost Per Foot, 2026

A per-foot quote can cover very different things. Here's what's inside the price and where a two-story house tips toward hiring out.

Save to Pinterest

We may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more

Row of gabled houses with warm white lights outlining rooflines and trim in snowy night
Photo: Elena Mozhvilo on Unsplash

The short answer

Professional Christmas light installation typically costs about $2 to $4 per linear foot for a simple single-story roofline and roughly $4 to $7 for two-story or complex rooflines, with lights and labor included and takedown often bundled. Whole-house jobs commonly land between $600 and $2,500. Storage may add $0 to $300. For most two-story houses, hiring out wins.

Typical cost
$2 to $7 per linear foot installed; about $600 to $2,500 for a typical whole house
Time needed
Pro crews often finish a house in half a day to one day; DIY takes roughly 8 to 14 hours to hang
Skill level
Hire a pro

Key points

  • Expect roughly $2 to $4 per foot for simple single-story rooflines and $4 to $7 per foot for two-story or complex ones, though local markets vary.
  • Ask whether the per-foot rate includes the lights, takedown, storage, and mid-season repairs, because a cheap-looking bid often leaves one out.
  • Takedown runs about $0.50 to $1.50 per foot when it's billed separately, and many full-service companies fold it into the install price.
  • On a two-story house, hiring out roughly breaks even if you value your time above $50 to $80 an hour.
  • A split job often works best: a pro handles the high rooflines, and you handle shrubs, porch rails, and ground-level decor.
In this guide
  1. What do professional installers charge per foot?
  2. How does the per-foot price break down?
  3. What pushes the per-foot price up or down?
  4. Should you buy lights or rent a package?
  5. DIY or hire out: where's the break-even on a two-story house?
  6. How can you cut the bill without cutting corners?

A quote of "$3 a foot" tells you almost nothing until you know what's inside it. Before you compare bids, ask three things: are the lights included, is takedown included, and is footage measured along the roofline or counted by strand length?

What do professional installers charge per foot?

Professional installers typically charge about $2 to $4 per linear foot for a simple single-story roofline and roughly $4 to $7 per foot for two-story or complex rooflines, based on typical U.S. pricing that varies by market.

That rate usually covers commercial-grade LED lights, clips, cords, a timer, installation, and burnout repairs during the season. A holiday light company that supplies the lights is selling a service, not a product, which is why per-foot numbers swing so much from one company to the next.

A typical house with 150 to 250 feet of roofline plus a few shrubs or a tree commonly runs $600 to $2,500. Dense, high-cost metros sit at the top of that range. Small markets sit near the bottom. Treat any national figure as a starting point and collect at least three local quotes.

How does the per-foot price break down?

Materials typically make up roughly a third to a half of a full-service per-foot price, with labor, takedown and storage covering the rest.

Line itemTypical U.S. rangeWhat to know
Materials (commercial-grade LED, clips, cords, timer)$0.80 to $2.00 per footUsually folded into the install price, not itemized
Installation labor, single-story, simple roofline$1.25 to $2.50 per footStraight eaves, easy ladder access
Installation labor, two-story or complex roofline$2.50 to $5.00 per footTall ladders or lifts, gables, steep pitch
Takedown$0.50 to $1.50 per footOften included in full-service packages
Off-season storage$0 to $300 per seasonTypically free if the company owns the lights
Shrubs and small trees$25 to $150 eachLarge tree wraps can cost several hundred dollars
Mid-season repair visit$0 to $150Free on most full-service plans, billed separately otherwise

Many companies also set a minimum job fee, often $300 to $600, so a small porch-only job can cost more per foot than the table suggests.

What pushes the per-foot price up or down?

Roofline height and complexity move the price more than anything else, because every extra story and every extra gable adds setup time.

  • Height and pitch: A steep roof or a second-story eave that needs a lift or a very tall ladder can raise the labor portion sharply.
  • Number of corners: Dormers, turrets, and many small gables mean more clips, more cord connections, and more ladder moves per foot.
  • Bulb type: Large C9 LED bulbs cost more than mini lights, and programmable color-changing strands cost more again.
  • Timing: Popular crews often fill their calendars well before December, and late bookings may cost more or get turned away.
  • Power access: You need an outdoor GFCI outlet near the run. If you lack one, a licensed electrician typically charges roughly $150 to $400 or more to add one, depending on your panel and wiring path, and some jurisdictions require a permit for the work.
  • Extras: Trees, wreaths, pathway lights, and controllers each add a line item.

Permanent track-style systems are priced differently, and permits, HOA rules, or local code may apply. Our permanent outdoor Christmas lighting permit guide covers what to check first.

Should you buy lights or rent a package?

Renting through a full-service company costs less up front and removes storage, while buying your own lights costs more in year one and often less in the years after.

Under a rental model, you pay roughly the same all-in rate each year, and the company owns, repairs, and stores the lights. If you buy through an installer, expect a higher first-year total and a labor-only rate afterward, with takedown and storage billed separately. Get those prices in writing.

If you buy outdoor Christmas lights yourself, spec matters. Cheap indoor-rated or thin-gauge strands tend to fail early outdoors, and our outdoor Christmas lights buying guide explains which ratings and bulb types are worth paying for.

DIY or hire out: where's the break-even on a two-story house?

For a two-story house with about 180 feet of roofline, hiring out roughly breaks even against DIY when you value your time above $50 to $80 an hour.

A pro at $4 to $7 per foot runs about $720 to $1,260 per season, with takedown often included. Hanging the lights yourself might take 8 to 14 hours and takedown another 4 to 6, so call it 12 to 20 hours of rough estimate. Divide the pro's price by 15 hours and you land near $48 to $84 an hour.

OptionCash cost (rough)Your time
Full-service pro, 180 feet$720 to $1,260 per seasonClose to zero
DIY, year one$150 to $450 for lights, clips, and a timer; add $200 to $400 for an extension ladder if you don't own one12 to 20 hours
DIY, year two onward$20 to $80 for replacements12 to 20 hours

On cash alone, DIY wins in the first year. Count your time and the gap narrows quickly. The bigger issue is the ladder. Reaching a second-story eave often means an extension ladder in the 28-foot range, and that's where most homeowners should stop and hire out.

We'd pick a split job for most two-story homes. Hire a pro for the high eaves and gables, then hang shrub lights, porch rails, and the front door yourself. The risky work stays off your ladder, and you keep much of the savings.

How can you cut the bill without cutting corners?

The most reliable savings come from trimming footage, booking early, and getting scope and pricing in writing.

  • Light the front only. Skipping side and back rooflines can cut footage by half or more.
  • Book in September or October. Early slots may avoid rush pricing, and some companies discount early commitments.
  • Ask for a multi-year agreement. Some companies hold a rate for two or three seasons.
  • Bundle takedown. Separate fees add up, so compare total season cost, not just the install rate.
  • Check insurance. Ask for proof of liability coverage and workers' compensation before anyone climbs your roof.
  • Use the right clips. If you hang any section yourself, proper light clips protect gutters and shingles. See our guide to clips for gutters and shingles.

The National Fire Protection Association publishes holiday lighting safety guidance that applies to a pro's lights as much as your own.

Your next step: measure your roofline with a tape or a satellite map, then request three written quotes that each state footage, included services, and takedown and storage pricing.

Questions people ask

How do I measure my roofline for a quote?

Add up the length of every eave, ridge, and gable edge you want lit, using a tape from the ground or a satellite-map measuring tool. Most installers will verify the number on site, so use yours to compare bids rather than treat it as final.

Do installers use my existing lights?

Some will, usually at a lower labor-only rate, but many prefer their own commercial-grade lights because they can stand behind them. If they use yours, expect them to decline responsibility for failures caused by old or damaged strands.

What should a Christmas light contract include?

It should state the footage or areas covered, the lights supplied, install and takedown dates, repair terms, and any storage fee. Ask for proof of liability insurance too.

Is a Christmas light storage service worth paying for?

If you own the lights and are short on garage or attic space, a storage fee of up to a few hundred dollars per season can be reasonable. If the company owns the lights, storage should typically cost you nothing.

Who pays if an installer damages my gutters or roof?

A licensed, insured company's liability policy typically covers damage it causes, which is why you should ask for a certificate of insurance before work starts. Coverage details vary, so confirm how claims are handled in writing and check your own homeowners policy.

Sources and further reading

Elsewhere in Pools & Yard Decor