Smart Home Hub Power Outage: What Still Works and What Doesn't
A blackout darkens mains-powered lights, while an internet loss mostly hits cloud routines. A $70 to $250 UPS keeps the hub and router up.
Save to PinterestWe may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more
The short answer
A hub does nothing without power, but on a UPS it can run local automations alongside your router and modem for roughly 3 to 6 hours with a 1000 VA unit. In an internet-only outage, locally paired Zigbee, Z-Wave, and Matter devices keep responding, while voice commands and cloud routines usually fail. Budget $70 to $250 for the UPS.
- Typical cost
- $70 to $250 for a UPS; $15 to $25 for a plug-in watt meter
- Time needed
- About 30 minutes to set up
- Skill level
- Beginner
Key points
- A hub with no power does nothing, but a hub with no internet still runs every automation built for local control.
- Voice assistants, remote access, and most vendor-cloud routines stop the moment the internet drops.
- Battery-powered locks still work at the door in a blackout, but a hub can only command them if the hub itself has backup power.
- A 1000 to 1500 VA UPS typically carries a hub, router, and modem for roughly 3 to 6 hours, so measure your own load.
- Mains-powered bulbs and switches go dark in a blackout whatever hub you own, so plan battery lighting separately.
In this guide
- What does a smart home hub do when the power or internet goes out?
- What's the difference between local and cloud control in an outage?
- Which devices and routines keep working in each outage?
- How long can a UPS run a hub, router, and modem?
- What should you plan for with locks, garage doors, and cameras?
- What is the cheapest change that keeps the most working?
A smart home hub with no power does nothing, and a hub with no internet still does most of what you care about if your devices were set up for local control. Sort your gear into those two groups before the next storm, not during it.
What does a smart home hub do when the power or internet goes out?
A smart home hub does nothing without power, and without internet it keeps running anything that doesn't need a cloud server. The hub is a small computer that talks to your devices over Zigbee, Z-Wave, Thread, or Wi-Fi and runs your rules, like turning on the porch light at sunset. Plugged into the wall, it goes down in a blackout along with your router and modem.
An internet outage is milder. The hub stays powered, the router still passes traffic between devices inside your home, and only the link to the outside world is cut. Local rules keep firing, and phone control from inside the house usually works. Anything that has to ask a distant server for permission does not.
What's the difference between local and cloud control in an outage?
Local control sends commands only inside your home, while cloud control routes them through a company's server, so local setups survive an internet outage and cloud setups don't. Nothing has to leave the building for a local command to work.
Platforms differ. Home Assistant and Hubitat both run automations on hardware in your home and can handle Zigbee and Z-Wave devices without cloud help, though the details depend on your setup. Our Home Assistant Green vs Hubitat comparison covers the tradeoffs. Other hubs run some automations locally and others through the vendor's cloud, and the app rarely says which is which. Check the maker's documentation for each routine type.
Matter helps here. It's designed so devices and controllers talk over your home network instead of a vendor server, so Matter devices generally keep working locally during an internet outage, provided the controller and any Thread border router have power. The Connectivity Standards Alliance maintains the standard, and our Matter hub buying guide explains which devices need a hub.
Which devices and routines keep working in each outage?
Battery-powered devices on a local protocol hold up best in an outage, while cloud-dependent and mains-powered devices fail first. The table is a general pattern, not a promise for any one product.
| Device or routine | Internet down, power on | Power out, no backup |
|---|---|---|
| Zigbee or Z-Wave bulbs and switches on a local hub | Work, including schedules | Dark; they need house power |
| Wi-Fi bulbs controlled through a vendor app | Often fail; some allow local control | Dark |
| Matter devices with a powered controller | Usually work locally | Mains devices dark |
| Battery Zigbee or Z-Wave sensors | Work and trigger local rules | Run, but nothing acts on them without a hub |
| Voice commands and cloud routines | Mostly fail | Fail |
| Remote access from away | Fails | Fails |
A hub can't light a room that has no electricity. Keep battery lanterns or a few battery-powered bulbs where you'd actually need them.
How long can a UPS run a hub, router, and modem?
A hub, router, and modem together draw about 20 to 40 watts, so a 1000 to 1500 VA UPS usually runs them for roughly 3 to 6 hours. A UPS, short for uninterruptible power supply, is a battery that sits between the wall and your gear. Runtime is roughly the battery's usable watt-hours divided by your load in watts, and it shrinks as the battery ages or sits in a cold garage.
Typical draws: a hub uses about 3 to 6 watts, a router about 8 to 20 watts, and a modem or fiber ONT about 5 to 15 watts. A plug-in watt meter costs $15 to $25 and replaces guessing with a real number.
| Backup type | Typical price | Runtime at about 30 watts |
|---|---|---|
| Mini DC UPS for routers | $40 to $90 | 1 to 2 hours |
| 600 to 750 VA UPS | $70 to $130 | 2 to 4 hours |
| 1000 to 1500 VA UPS | $130 to $250 | 3 to 6 hours |
| 250 to 500 Wh power station with UPS mode | $200 to $500 | 6 to 12 hours |
Treat these as estimates and check each unit's rated watt-hours and any runtime chart the maker publishes. Mini DC units need the right voltage for each device, so match the adapter labels before plugging in. Power stations vary in how fast they switch over, so confirm the UPS mode is meant for electronics.
What should you plan for with locks, garage doors, and cameras?
Battery-powered locks usually keep working at the door during an outage, while garage controllers and cameras often don't. A battery-powered smart lock runs its keypad and deadbolt motor on its own cells. Z-Wave and Zigbee locks can still be commanded by a hub that has backup power, while Wi-Fi locks need the router up as well. Keep a physical key somewhere outside the smart system, and replace lock batteries on a schedule instead of waiting for the low-battery alert.
Garage doors split two ways. Some openers include a battery backup, but a separate garage door controller often depends on Wi-Fi, so find the manual release cord now. Cameras need the most thought, because many are mains-powered or PoE and stop recording when the house loses power. Our guide to cloud vs local storage for security cameras shows what each option does when the internet fails.
What is the cheapest change that keeps the most working?
A UPS on the hub, router, and modem is the cheapest fix, typically $70 to $250 depending on size. For most homes we'd pick a 1000 VA unit, which carries that gear for a few hours. Step up to a larger unit or a power station only if your local outages run long. Pair it with a hub that runs your key automations locally, and you keep schedules, sensors, and lock control for hours.
Then move the routines you care about, like arrival lights and lock schedules, off cloud routines and onto the hub's local rules. Label your battery lamps so someone besides you can find them. After any long outage, check that devices rejoined the network; CISA publishes general guidance on securing home networks and devices if you end up resetting a router.
Start tonight: plug a watt meter in at your router and modem to see what you're actually drawing.
Questions people ask
Will Alexa or Google still control my lights if the internet is down?
Usually not. Voice commands are generally processed in the cloud, so they fail when the connection drops. Some newer devices can handle simple commands locally, so check your specific speaker and bulbs.
Do I need a UPS on my modem as well as my router?
Only if you want internet during the outage. For local control inside the house, the hub and router are enough, since the modem just links you to the outside world. Your provider's network may be down anyway, so a powered modem doesn't guarantee a connection.
Will my schedules still run if the hub reboots without internet?
Local schedules generally run, but behavior varies by hub. Some rely on the internet for the correct time or sunrise and sunset data, so check your hub's documentation. A UPS avoids most of those reboots in the first place.
Is a portable power station better than a UPS for a hub?
A power station holds more energy, so it can run your gear longer, but not every model switches over fast enough to avoid a reboot. A standard UPS is built for that handoff. Choose a power station only if it lists a UPS or pass-through mode meant for electronics.
How often should I replace UPS batteries?
Sealed lead-acid UPS batteries commonly last around 3 to 5 years, depending on heat and use. Replace them on the manufacturer's schedule or when the unit's self-test reports a weak battery.
Sources and further reading
- Connectivity Standards Alliance (Matter) Official home of the Matter smart home standard
- CISA Federal cybersecurity advice for securing home devices and networks
Was this article helpful?