Fix and Furrow
Advertise

Home Automation Hub Installation Cost in 2026: What to Expect

Retrofitting a hub means closed walls, old switch boxes, and extra line items. Here's what each route costs and where DIY stops making sense.

Save to Pinterest

We may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more

Smart home hub on a shelf beside a wall switch plate with the cover removed
Photo: James Yarema on Unsplash

The short answer

A home automation hub installation costs about $150 to $1,500 if you do it yourself, $3,000 to $10,000 when a dealer sets up a few rooms, and $10,000 to $25,000 or more for a wired whole-house system. The hub itself is only $50 to $300. Wiring, network upgrades, and programming labor drive the rest.

Typical cost
$150 to $1,500 DIY; $3,000 to $25,000+ professionally installed
Time needed
One weekend for a DIY hub; one to five days for a professional install
Skill level
Intermediate

Key points

  • The hub hardware is the cheap part at $50 to $300; wiring, networking, and programming labor make up most of a professional bill.
  • Adding a neutral wire at a switch box often costs $150 to $500 per location, and older homes may need several.
  • For most existing houses, we'd pick a DIY Matter-capable hub plus an electrician for only the switch-box work.
  • Hire an integrator when you want wired keypads, low-voltage runs, shades, or audio, or when the project passes roughly $5,000.
  • Budget for ongoing costs: optional cloud subscriptions, dealer support plans, sensor batteries, and eventually a replacement hub.
In this guide
  1. What does a home automation hub installation include?
  2. Cost table: hub hardware, labor, and add-ons by setup type
  3. What pushes the price up in an existing home?
  4. What wiring and electrical costs catch homeowners off guard?
  5. How can you cut the bill without cutting corners?
  6. DIY vs hiring an installer: where does the line fall?
  7. What are the ongoing costs of a smart home hub?

For most existing houses, the realistic numbers are $150 to $1,500 if you set up the hub yourself, $3,000 to $10,000 if a dealer installs and programs a few rooms, and $10,000 or more for a wired whole-house system. The hub is the cheap part. Wiring, networking, and labor are where retrofits get expensive, because the walls are already closed and nobody left you a neutral wire.

What does a home automation hub installation include?

A hub installation covers the hub itself, the devices it controls, the network they run on, and the labor to wire and program all of it. Most buyers price only the first item.

The hub is the box (or app-based service) that lets lights, locks, thermostats, and sensors work together. Hardware alone runs roughly $50 to $300. A Matter-capable hub from a mainstream brand sits at the low end. A pre-built Home Assistant box is typically $100 to $300, plus $30 to $60 for a Zigbee radio or Z-Wave stick if your devices need one. The software is free. If Matter is new to you, the Connectivity Standards Alliance publishes the standard and a directory of certified products.

Control4 and similar platforms are sold through authorized dealers, so you're paying for design, programming, and support. The controller can run $500 to $2,000, and labor and programming often match or exceed the hardware.

Cost table: hub hardware, labor, and add-ons by setup type

A DIY hub setup typically totals $150 to $1,500, while professionally installed systems start near $3,000 and climb past $25,000 for whole-house work. These are typical U.S. ranges; local labor rates and device choices will move them.

Setup typeHardwareLaborTypical total
DIY Matter hub with plug-in and battery devices$150 to $900$0$150 to $900
DIY Home Assistant with Zigbee or Z-Wave$250 to $1,500$0 (your time)$250 to $1,500
Hub plus 8 to 12 smart switches, electrician installs switches$500 to $1,200$800 to $3,000$1,300 to $4,200
Dealer-installed system, 3 to 5 rooms$1,500 to $5,000$1,500 to $5,000$3,000 to $10,000
Integrator whole-house system with wired keypads$6,000 to $15,000$4,000 to $12,000$10,000 to $25,000+

The add-ons below are what turn a tidy quote into a bigger one.

Add-onTypical cost
Neutral wire added at one switch box$150 to $500
Cat6 cable run to a room or keypad location$100 to $300 per drop
Wired keypad, installed (excluding the device)$150 to $400 per location
Mesh Wi-Fi upgrade$150 to $600
Wired access point with cable run$200 to $500 each
Electrician hourly rate$50 to $150, often with a $100 to $250 minimum visit
Integrator programming and labor$75 to $150 per hour

What pushes the price up in an existing home?

Finished walls, old wiring, and weak Wi-Fi do the most damage to a budget. Each adds labor that a new build would never need.

Plaster-and-lath walls, brick, and insulated exterior walls make cable fishing slow. Two-story houses with no attic or basement access are worse. A cable run that costs $100 in an open-framed ranch can cost $300 or more when someone has to open drywall and patch it.

Scope matters too. Per room, expect roughly $300 to $1,000 for DIY and $1,000 to $4,000 with a professional, and the high end is shades, audio, and keypads rather than lights. Mixing ecosystems pushes the price up as well, since an integrator bills hours to make unlike devices behave as one system. Labor in large metro areas can run well above national ranges.

What wiring and electrical costs catch homeowners off guard?

The biggest surprise is usually the switch box, where many older homes have no neutral wire and adding one costs $150 to $500 or more per location.

Most smart switches need a neutral because they need constant power to keep their radio alive. Current code generally calls for a neutral at switch locations in new work, with exceptions and local variation. Older houses often have only a switch loop, with no neutral in the box. You can pay an electrician to run one, or buy a no-neutral smart switch, which costs roughly $40 to $80 compared with $25 to $50 for a standard model and comes with dimming and bulb-compatibility limits.

Low-voltage work is the second surprise. Wired keypads, hardwired cameras, and access points need Cat6 cable, and every drop is a separate charge. For anything fixed in place, a wired backbone beats Wi-Fi.

The third is the network. A hub with 40 or 50 devices exposes a weak router fast. A mesh Wi-Fi system is common, and larger or masonry-heavy houses may need wired access points. Your electrical panel usually doesn't need an upgrade just for a hub. If an electrician finds a fuse box or an overloaded panel, that fix is a separate and much bigger job, often a few thousand dollars.

How can you cut the bill without cutting corners?

Start small with a Matter-capable hub, add one room at a time, and pay a professional only for work that touches wiring behind walls.

  • Buy wireless first. Smart plugs, battery sensors, and bulbs need no electrician and cost a fraction of switches.
  • Batch the electrical work. One visit for eight switches is cheaper than four visits for two, since the minimum service charge repeats.
  • Use no-neutral switches only where needed. Pay for a neutral where a bulb type or dimmer demands one.
  • Pick open standards. Matter and local-control hubs reduce the odds you'll replace devices when a brand changes course.
  • Get itemized quotes. Ask any integrator to separate hardware, labor, and programming so you can compare line by line.

DIY vs hiring an installer: where does the line fall?

DIY is reasonable when the work stays on the plug-in, battery, and low-voltage side. Hire out when it opens a wall or touches line-voltage wiring you can't verify.

Set up the hub, the Wi-Fi, the plug-ins, the sensors, and the app yourself. A hub takes an afternoon, and most of that goes to naming devices and building routines. Replace switches yourself only if you've done basic electrical work, you find a neutral wire in the box, and the wiring looks modern. Otherwise, call a licensed electrician for the switch boxes and keep the rest DIY. For most existing homes, that hybrid is the best value.

A professional install makes sense when you want wired keypads, shade control, whole-house audio, or a system your family can run without you. It also makes sense once the total passes roughly $5,000, because design mistakes get expensive to fix. You're paying for planning, tidy wiring, programming, and someone to call when it breaks. Between two bids, compare warranty length, remote support, and whether you'll get admin access to your own system.

Thermostats are a common middle case. Many run on low-voltage wiring, but if yours is line-voltage (typical with electric baseboard heat), leave it to an electrician.

What are the ongoing costs of a smart home hub?

Plan on nothing to roughly $15 a month for optional cloud features, plus dealer support plans of a few hundred dollars a year if you use an integrator.

Many hubs work fully with no subscription, but some charge for cloud video storage, remote access, or advanced features. Home Assistant sells an optional paid cloud service, and dealer platforms commonly offer maintenance or monitoring agreements. Read the renewal terms before you buy, and check the FTC's consumer advice on subscriptions and automatic renewals.

Hardware wears out, too. Budget to replace a hub every several years and sensor batteries every year or two. Keep firmware current, change default passwords, and put devices on a separate network. The Cybersecurity and Infrastructure Security Agency publishes home-network security guidance.

Your next step: walk the house, count the switch boxes you'd want smart, then open two or three (breaker off) to see whether a neutral wire is there. That count tells you whether you're in DIY territory or need an electrician's quote.

Questions people ask

Does a smart home hub add value when I sell?

It can help with buyer appeal, but there's no reliable dollar figure you should count on. Simple, documented, transferable systems matter more than expensive ones. Leave the admin logins and a short device list for the new owner.

Can I use a hub without good internet?

Yes, if the hub supports local control. Local hubs run automations on your home network even when the internet drops, though remote access and voice assistants may stop working. You still need a stable router for the devices themselves.

How long does a professional hub installation take?

A small, few-room job often takes one to two days. Whole-house projects with new cabling, keypads, and programming can take three to five days on site, often spread over weeks. Closed walls and long cable runs stretch the schedule.

Do I need a Matter hub for the devices I already own?

Not necessarily. Matter helps when you mix brands, but existing Zigbee, Z-Wave, or Wi-Fi devices may still work through the hub or a bridge they came with. Check the hub's compatibility list before you buy.

Is it cheaper to automate one room at a time?

Usually yes, because you spread the cost and learn what you actually use. The tradeoff is more electrician trips if you hire out switch work. Group the rooms that need wiring into one visit.

Sources and further reading

Elsewhere in Smart Home