Fix and Furrow
Advertise

Home Assistant Green vs Hubitat for Zigbee and Z-Wave

Hubitat has both radios built in. Home Assistant Green needs dongles but reaches far more integrations. Here's what that trade costs.

Save to Pinterest

We may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more

Small smart home hub on a shelf with a USB Zigbee dongle on an extension cable and an Ethernet cord
Photo: TechieTech Tech on Unsplash

The short answer

For a home that already runs mostly Zigbee and Z-Wave devices, Hubitat Elevation is the easier and usually cheaper local hub: both radios are built in and no subscription is required. Home Assistant Green runs about $165 to $235 once you add a Zigbee dongle and Z-Wave stick, but it offers far more integrations and dashboards, with a heavier maintenance load.

Typical cost
$130 to $200 for Hubitat; $165 to $235 for Home Assistant Green with dongles
Time needed
2 to 4 hours for the hub, plus 1 to 3 minutes per device to re-pair
Skill level
Intermediate

Key points

  • Hubitat Elevation includes Zigbee and Z-Wave radios, while Home Assistant Green has neither and needs roughly $65 to $105 in dongles.
  • Both hubs run Zigbee and Z-Wave automations locally, so an internet outage won't stop your motion lights or door sensors.
  • Home Assistant's frequent updates can occasionally break automations, so read release notes and back up first; Hubitat updates are manual too.
  • Switching in either direction means re-pairing every Zigbee and Z-Wave device, so decide before you buy.
  • Choose Hubitat for a stable, low-attention house, and Home Assistant Green if you plan on dozens of devices, custom dashboards, and non-Zigbee integrations.
In this guide
  1. How do Home Assistant Green and Hubitat differ at a glance?
  2. Side-by-side: price, radios, and device support
  3. How well do they handle Zigbee and Z-Wave in practice?
  4. Which is more reliable for automations and local control?
  5. What do ongoing costs and maintenance really look like?
  6. How do they compare on Matter and Thread?
  7. Which hub wins for your situation?

Hubitat Elevation is the better pick if you already own Zigbee and Z-Wave devices and want them to work quietly. Home Assistant Green is the better pick if you want the hub to grow into the center of the whole house. Both run automations locally, so the real question is how much of your time you want to spend on the system after day one.

How do Home Assistant Green and Hubitat differ at a glance?

Hubitat Elevation is a purpose-built hub with Zigbee and Z-Wave radios inside, while Home Assistant Green is a small, radio-less computer that runs the Home Assistant software.

That one difference drives almost everything else. Hubitat is an appliance: plug it in, pair devices, write rules. Home Assistant Green is a platform. It talks to thousands of device types, but you supply the radios and learn more of the system to keep it healthy. Neither needs the cloud to turn on a light.

Side-by-side: price, radios, and device support

Hubitat costs less up front for a Zigbee and Z-Wave home because the radios are included, while Home Assistant Green costs more once you add the two USB radios it needs.

ItemHubitat Elevation C-8 ProHome Assistant Green
Hub price (typical)$130 to $200$100 to $130
Zigbee radioBuilt inZigbee dongle, $30 to $45
Z-Wave radioBuilt in (800 series)Z-Wave stick, $35 to $60
Realistic total$130 to $200$165 to $235
Required subscriptionNone for local useNone; optional Home Assistant Cloud, about $6.50 a month

Prices move with sales and model revisions, so check current listings. The dongles are the part people forget. Home Assistant Cloud is optional and mainly buys easy remote access and Alexa or Google linking, while helping fund the project.

How well do they handle Zigbee and Z-Wave in practice?

Both handle mainstream Zigbee and Z-Wave sensors, switches, locks, and plugs well, but they get there differently.

On Hubitat, you pair a device and it usually picks up a built-in driver. Odd devices may need a community driver, installed through Hubitat Package Manager. The catch is that the radios live inside the hub, so the hub's location sets your mesh quality. Put it in a basement utility closet and upstairs sensors may struggle.

On Home Assistant, you choose the software that drives each radio. Z-Wave JS handles Z-Wave. For Zigbee you pick between the built-in ZHA integration and Zigbee2MQTT, which has broad device support but adds another piece to maintain. The upside is physical: a dongle on a USB extension cable can sit away from the hub and away from USB 3 interference, which helps Zigbee range.

Here's the part that stings: devices don't carry over from one hub to the other. Moving a network means excluding or resetting each device and re-pairing it, typically one to three minutes apiece. With 80 devices, plan on an afternoon.

Which is more reliable for automations and local control?

Both run Zigbee and Z-Wave automations locally without the internet, so reliability is close to a tie, and the difference shows up in how updates behave.

Hubitat's Rule Machine is a form-based rule builder. It's clunky at first and then dependable. Updates are manual, so you can wait a few weeks to see what other users report before installing one.

Home Assistant's automations are more flexible, with conditions, templates, and dashboards that look better than anything Hubitat produces. The price is a rapid release cycle. Monthly updates sometimes retire an integration or change a setting, and an automation can quietly stop working afterward. Read the release notes and take a backup first.

After a power outage, both hubs should restart on their own. Neither has a battery, so a small UPS (about $60 to $100) is worth it if locks or a security system depend on the hub. Home Assistant Green uses built-in storage rather than an SD card, which avoids the corrupted-card failures common on DIY builds. Either way, copy backups off the hub.

What do ongoing costs and maintenance really look like?

Hubitat typically costs nothing after purchase and takes a few minutes a month, while Home Assistant costs a little more money and noticeably more time.

As a rough planning figure, budget 15 minutes a month for Hubitat: glance at the logs, check batteries, install an update once it's been out a while. For Home Assistant, plan on 30 to 60 minutes a month, more when you add devices or integrations. For remote access, Home Assistant Cloud is the easy route, or you can set up your own VPN. Never open a port to the internet for either hub. CISA publishes general guidance on securing home networks and devices at cisa.gov.

If you'd rather hire the setup, our home automation hub installation cost guide shows what pros typically charge.

How do they compare on Matter and Thread?

Home Assistant generally has the broader Matter support, while Hubitat's newer hubs add Matter with a narrower feature set.

Home Assistant Green works as a Matter controller over your network. For Thread devices you need a Thread border router, which can be a compatible dongle or a Thread-capable device you already own, such as certain Apple TV, HomePod mini, Nest Hub, or Echo models. Hubitat's Matter support has historically trailed Home Assistant in device types, so confirm the current feature list for any device you plan to buy. The Connectivity Standards Alliance maintains the Matter certified product information. Our guide to whether you need a hub for Matter covers the broader question.

If your house is mostly Zigbee and Z-Wave today, Matter shouldn't drive the decision. Treat it as a bonus for future purchases.

Which hub wins for your situation?

Hubitat wins for most homes with an existing Zigbee and Z-Wave mix, and Home Assistant Green wins for larger, more ambitious setups.

HouseholdBetter pickWhy
Renter with 10 to 20 devicesHubitatLowest cost, no dongles, easy to pack up and move
Tinkerer with 80 devicesHome Assistant GreenDongle placement, Zigbee2MQTT, dashboards, and the integrations list
Family that wants nobody to touch itHubitatManual updates, fewer surprises, simpler to hand off
Mostly Matter and Wi-Fi devices with a few Zigbee sensorsHome Assistant GreenBroader Matter handling and cloud-free integrations

Our default recommendation for the typical reader, someone with 20 to 50 existing Zigbee and Z-Wave devices who wants motion lights and door alerts to just work, is the Hubitat Elevation C-8 Pro. You spend less, set up faster, and rarely get a text from a family member asking why the hallway light stopped working.

Choose Home Assistant Green if you already enjoy tinkering, or you expect to add cameras, energy monitoring, and dashboards soon. Buy the radios and the extension cable at the same time.

Next step: list every Zigbee and Z-Wave device you own, note which ones need special drivers, and check that list against each hub's compatibility pages before you order.

Questions people ask

Can I run both Hubitat and Home Assistant at the same time?

Yes. Many people keep Hubitat as the Zigbee and Z-Wave controller and connect it to Home Assistant for dashboards and extra integrations. It adds a second system to maintain, but it lets you migrate gradually instead of re-pairing everything at once.

Is Home Assistant Green powerful enough for 80-plus devices?

For Zigbee and Z-Wave sensors, switches, and plugs, usually yes. Device count is rarely the limit; mesh quality, repeater count, and heavy add-ons like video processing matter more. If you plan on camera analysis or large databases, consider more powerful hardware.

Will my smart home keep working if the internet goes down?

Local Zigbee and Z-Wave automations keep running on both hubs. Anything that depends on a cloud service, such as voice assistants, weather lookups, or cloud-only devices, stops until the connection returns.

Do I need a Thread dongle for Home Assistant Green?

Only if you want Thread devices and don't already have a compatible border router at home. Some Apple, Google, and Amazon speakers and displays fill that role, so check your models first. A dedicated dongle gives you more control.

Should beginners start with Hubitat or Home Assistant?

Beginners with existing Zigbee and Z-Wave devices will usually have an easier time on Hubitat, because pairing and basic rules work out of the box. If you enjoy learning new software, Home Assistant offers more room to grow.

Sources and further reading

Elsewhere in Smart Home