Fix and Furrow
Advertise

Part of our Heating and Cooling guide

Heat Pump Size Calculator: How Many Tons Do You Need?

Save to Pinterest

The short answer

A common rule of thumb is 20 to 30 BTU per square foot of living space, or about 400 to 600 square feet per ton. Only a Manual J load calculation gives the right size for your house.

Your estimate

A rough estimate to plan with, not a quote or professional advice. Check the numbers against local prices and get written quotes before you buy or hire.

How this calculator works

  • Starts from Carrier's rule of thumb of 20 to 30 BTU per square foot. Better insulation moves you toward the low end, poor insulation toward the high end.
  • Taller ceilings mean more air to heat and cool, so the estimate scales with ceiling height (an 8-foot ceiling is the baseline).
  • One ton of heat pump capacity is 12,000 BTU per hour. Results are rounded to the nearest half ton, the steps systems are sold in.
  • This is a sanity check, not a sizing. A room-by-room Manual J calculation accounts for windows, air leaks, ducts and your exact climate, and can change the answer by a ton or more.

Sources

Price ranges checked October 2026. If you spot a number that looks off, email corrections@fixandfurrow.com.

Put this calculator on your site

It's free to use: copy the code below and paste it into any web page, and the calculator will show up there, sized to fit.

Preview

Guides that go with this tool