How to Choose a Home Solar Battery and Size It for Outages
Start with the circuits you can't lose, convert them to kWh, then match the battery to your inverter instead of the other way around.
Save to PinterestWe may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more
The short answer
List the circuits you must keep running, add up their daily kWh, then add about 15 percent for losses. For a 5 to 8 kWh daily need, one lithium iron phosphate battery with 10 to 13 kWh usable and about 5 kW continuous output is the usual fit. Choose AC-coupled if you're keeping your current inverter.
- Typical cost
- $10,000 to $16,000 installed for a typical 10 to 13 kWh lithium battery
- Time needed
- Often 2 to 6 weeks from signed quote to switch-on, mostly permit and utility waits
- Skill level
- Hire a pro
Key points
- Size from a written list of critical loads, not from a battery's headline capacity.
- Choose AC-coupled to retrofit an existing system, and DC-coupled only when you're adding panels or replacing the inverter with a hybrid unit.
- Lithium iron phosphate is the sensible default chemistry for nearly every home.
- Usable kWh, continuous kW, warranty terms, and inverter compatibility matter most; app features and scalability claims matter least.
- Expect roughly $10,000 to $16,000 installed for a single 10 to 13 kWh battery, plus permit and utility approval time.
In this guide
- What does a home battery actually do for solar panels?
- How do I size a solar battery backup for outages?
- AC-coupled vs DC-coupled: which fits your inverter?
- Which battery chemistry is best: lithium vs lead acid?
- Which battery features matter, and which don't?
- How do home battery types and price tiers compare?
- What's the best home solar battery setup for most homes?
- What permits and utility approvals does a battery need?
Write down the circuits you refuse to lose in an outage before you look at a single spec sheet. That list sets the size, the size narrows the products, and your existing inverter decides the rest. For a grid-tied home that needs 5 to 8 kWh a day of backup, the answer usually lands on one lithium iron phosphate battery with 10 to 13 kWh of usable capacity and about 5 kW of continuous output.
What does a home battery actually do for solar panels?
A home battery stores electricity from your panels or the grid and releases it when you want it, including during an outage. Panels alone won't do that. A standard grid-tied system shuts down when the grid fails, by design, so line workers aren't endangered by power flowing back into the lines.
A battery paired with a backup-capable inverter and a transfer switch creates a small island that keeps your selected circuits live. It usually won't run the whole house. Central air conditioning, an electric range, and an electric dryer running together can drain a typical battery in a few hours or less. For most households the battery is outage insurance first and a bill-trimming tool second, and the payback math depends on your utility's rates. The DOE Solar Energy Technologies Office has background on how storage fits with solar.
How do I size a solar battery backup for outages?
Add up the daily kWh of your critical loads, multiply by the days you want to cover, then add about 15 percent for inverter losses. The figures below are ballpark. Check nameplates, or measure with a plug-in watt meter, because older appliances often draw far more than new ones.
| Critical load | Typical running watts | Typical daily kWh |
|---|---|---|
| Refrigerator | 40 to 80 W average | 1 to 2 kWh |
| Chest freezer | 20 to 40 W average | 0.5 to 1 kWh |
| Well pump (1/2 to 1 hp) | 800 to 1,200 W running, 2 to 3 times that at startup | 0.5 to 1.5 kWh |
| LED lights (several rooms) | 50 to 100 W | 0.3 to 0.6 kWh |
| Modem, router, phone chargers | 15 to 30 W | 0.4 to 0.7 kWh |
| Window AC (5,000 to 8,000 BTU) | 450 to 700 W | 3 to 5 kWh for 6 to 8 hours |
Take a sample home: fridge 1.5, freezer 0.8, well pump 1.0, lights 0.5, Wi-Fi 0.6. That's 4.4 kWh a day. Add a window AC for six hours at about 500 W and you're near 7.4 kWh. Add 15 percent and you want roughly 8.5 kWh usable. A single 10 kWh battery covers that for about a day, and recharging from your panels on sunny days can stretch it considerably.
Power matters as much as energy. The battery's continuous kW rating has to cover everything running at once, plus the startup surge of motors. In the sample above, the running load is under 2 kW, but the well pump's startup surge can push the momentary peak to 3 or 4 kW. A 5 kW unit has comfortable headroom.
Group those circuits on a critical loads panel, a small sub-panel fed by the battery, so the backup system only powers what you chose. An installer will usually move the breakers for you.
AC-coupled vs DC-coupled: which fits your inverter?
Choose an AC-coupled battery if your existing system uses microinverters or a string inverter that isn't hybrid-ready. Choose DC-coupled if you're installing new panels or replacing the inverter with a hybrid inverter that manages panels and battery together.
An AC-coupled battery has its own inverter and ties into the AC side of your system. It's the easy retrofit because nothing about your panels or current inverter changes. The cost is slightly lower round-trip efficiency, since solar power gets converted from DC to AC, back to DC for storage, then to AC again. With microinverters on the roof, AC-coupled is the practical path anyway.
DC-coupled systems send panel power straight into the battery through one hybrid inverter. That's more efficient and means fewer boxes on the wall. But retrofitting one means replacing your inverter, which only makes sense if it's old or failing.
Battery compatibility with a hybrid inverter is not universal. Manufacturers publish approved battery lists, and the two devices have to speak the same communication protocol. Get the compatibility confirmed in writing on your quote.
Which battery chemistry is best: lithium vs lead acid?
Lithium iron phosphate, often called LFP, is the right default for nearly every home. It typically delivers several thousand cycles, lets you use most or all of its rated capacity, and is more thermally stable than other common lithium types.
In the lithium vs lead acid solar battery debate, lead acid wins only on sticker price. You can generally use about half of a lead acid bank's capacity without shortening its life, cycle life runs from a few hundred to roughly 1,500 depending on type and care, and flooded versions need ventilation and upkeep. Per usable kWh over its life, lead acid usually costs more. Reserve it for an off-grid cabin on a tight budget.
Nickel manganese cobalt (NMC) lithium packs are more compact and appear in some wall-mounted units. They're acceptable when the product carries a recognized safety listing such as UL 9540, but you give up some thermal margin compared with LFP. If you have the space, LFP is the safer bet.
Which battery features matter, and which don't?
Usable capacity, continuous power, warranty terms, and inverter compatibility matter most; app screens and scalability claims matter least. Here's what to weigh:
- Usable kWh, not nominal. A battery's total capacity and its usable capacity can differ. Compare usable figures.
- Continuous kW and surge. This decides whether the well pump or a window AC will start.
- Warranty. Look for 10 years, a stated cycle or throughput limit, and a guaranteed end-of-warranty capacity, often 60 to 70 percent. Read what voids it.
- Transfer speed. A fridge doesn't care about a brief gap. Desktop computers and medical equipment do, so ask how fast the switchover is. For life-support devices, plan separately with your installer and doctor.
- Expandability. Worth having if you might add a second unit. Confirm how many can stack on your inverter.
- Operating temperature. Check the rating if the battery will sit in an unheated garage.
Ignore the rest. Short-burst peak surge claims, headline numbers for how far a system could scale, round-trip efficiency differences of a few points, and app design won't change how your house rides out a storm.
How do home battery types and price tiers compare?
Expect home battery backup cost of roughly $10,000 to $16,000 installed for one 10 to 13 kWh lithium unit, or about $800 to $1,500 per installed kWh. Hardware is only part of that. The gateway, critical loads panel, labor, and permits commonly add several thousand dollars, and your region and the electrical work involved shift the total.
| Type | Typical usable size | Typical installed price | Best for | Watch for |
|---|---|---|---|---|
| Wall-mounted LFP, AC-coupled | 10 to 13.5 kWh | $10,000 to $16,000 | Retrofits to existing solar | Slightly lower efficiency |
| DC-coupled battery with hybrid inverter | 10 to 20 kWh | $12,000 to $22,000 with inverter | New solar or inverter replacement | Approved-battery lists |
| Modular rack-mounted LFP | 5 to 30 kWh | $9,000 to $25,000 | Growing capacity in steps | Installer experience with the brand |
| Lead acid bank | 4 to 10 kWh usable | $5,000 to $12,000 | Off-grid on a budget | Maintenance and short lifespan |
| Portable power station | 1 to 4 kWh | $1,000 to $4,000 | Fridge and Wi-Fi only | Not whole-circuit backup |
A portable power station can keep a fridge and router alive through a short outage, but it isn't a substitute for a wired system. As rough tiers, under $9,000 buys small or portable storage, $10,000 to $16,000 buys a solid single-battery home system, and $17,000 to $30,000 or more buys two or three units for heavy loads.
Incentives change. Federal tax credits for home batteries have been revised in recent years, so confirm what applies with a tax professional, and check state and utility programs. Before you sign, browse the FTC's consumer advice for guidance on home-improvement and solar sales, and get at least three quotes built from the same load list.
What's the best home solar battery setup for most homes?
For a grid-tied home with a 5 to 8 kWh daily need, we'd pick one lithium iron phosphate battery with 10 to 13.5 kWh usable and about 5 kW continuous output, wired to a critical loads panel. Go AC-coupled unless you're replacing the inverter anyway.
That size covers about a day of essentials with room for losses, and solar recharging stretches it further. AC-coupled fits what's already on your roof without redoing it. Skip lead acid. Skip oversizing, too, since each extra kWh often costs $800 or more. If you want central air or an electric range backed up, you're looking at two or more units and a much larger quote, which is a different project.
What permits and utility approvals does a battery need?
Nearly every jurisdiction requires an electrical permit, and your utility typically must approve the interconnection before you switch the battery on. Codes vary locally, so your building department has the final word. Most adopt model codes such as those published by the International Code Council, alongside the National Electrical Code.
Fire rules often limit where lithium batteries can sit. Garages and exterior walls are commonly allowed. Bedrooms and living spaces often aren't. Ask your installer about clearances, and confirm the battery carries a listing such as UL 9540. Expect roughly two to six weeks from contract to switch-on, mostly waiting on permits and the utility.
Your next step is small. Write the load list this weekend, measure the fridge with a plug-in watt meter, and send the same numbers to three installers.
Questions people ask
How long will a 10 kWh battery run my house?
It depends entirely on what you connect. At 4 to 5 kWh a day for essentials, a 10 kWh battery lasts about two days. Whole-house loads with central air can drain it in a few hours.
Can I add a battery to solar panels installed years ago?
Usually yes, and an AC-coupled battery is the easiest way because it leaves your existing inverter alone. Your installer needs to check panel and inverter age, your main panel capacity, and utility rules before quoting.
Is a generator cheaper than a battery for outages?
A portable or standby generator typically costs less upfront, but it needs fuel, noise tolerance, and maintenance. A battery runs silently and recharges from your panels. If you use a generator, keep it outdoors and well away from windows because of carbon monoxide.
Will a home battery run my central air conditioner?
Only if it's sized for it. Central AC can draw roughly 2 to 5 kW running and much more at startup, so you'd likely need two or more batteries and a soft-start device. A window unit is usually far more economical for backup.
Can I install a home battery myself?
No. Batteries involve high-energy DC and wiring tied into your main panel and the utility connection, and most jurisdictions require a permit and inspection. Hire a licensed electrician or solar installer.
Sources and further reading
- DOE Solar Energy Technologies Office Federal background on solar technology and storage
- International Code Council Model building and electrical code information
- FTC Consumer Advice Consumer guidance on avoiding home-improvement sales pitfalls
Was this article helpful?