Fix and Furrow
Advertise

Outdoor Smart Plug for Christmas Lights: Amps and Timers

Divide watts by 120, stay under 80 percent of the rating, and set a sunset schedule that follows the calendar.

Save to Pinterest

We may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more

Multicolor Christmas lights strung on a snowy pine tree outdoors during snowfall
Photo: Gary Meulemans on Unsplash

The short answer

Yes. Pick a plug rated for wet locations, ideally 15 amps (1,800 watts), and keep your total light load under about 12 amps (1,440 watts). Divide each string's watts by 120 to get amps. LED strings draw so little that the plug is rarely the limit, but older incandescent C9 strings add up fast.

Typical cost
$15 to $50 per outdoor smart plug, depending on outlet count and weather rating
Time needed
About 20 minutes per plug
Skill level
Beginner

Key points

  • Check three numbers before you buy or plug in: the IP rating, the amp rating, and the total wattage of your light strings.
  • Convert watts to amps by dividing by 120, and keep the total at or below 80 percent of the weakest rating in the chain.
  • LED strings use a few watts each, so the string's own end-to-end connection limit usually stops you before the plug does.
  • Use a sunset schedule with the plug's location and time zone set, instead of fixed clock times that drift as days shorten.
  • Skip the smart plug for blower motors, heaters, hardwired displays, or any load above about 12 amps.
In this guide
  1. What does outdoor-rated actually protect on a smart plug?
  2. How do I read the amp and watt ratings on the label?
  3. How do I convert light wattage to amps?
  4. How many strings of LED lights can one smart plug run?
  5. How do I set a sunset timer without surprises?
  6. Where should I mount the plug so rain and snow don't reach it?
  7. When is a smart plug the wrong tool for the job?

Yes, an outdoor smart plug can run your holiday display, provided three numbers check out: the enclosure rating, the amp rating, and the real draw of your light strings. LED sets barely register on a plug built for 15 amps. Older incandescent strings are where people overload things.

What does outdoor-rated actually protect on a smart plug?

An outdoor-rated smart plug has a housing built to shed rain, dust, and cold, but the rating often doesn't cover the spot where your light cord plugs in.

Look for an IP rating on the box. IP44 means the housing resists splashing water from any direction, which handles most rain under an eave. IP65 or IP66 adds dust-tight construction and resistance to water jets, a better choice for a plug sitting in open weather. Neither means the plug can sit in a puddle or a snowbank. Also look for a safety-lab listing such as UL or ETL for wet locations, and compare the operating temperature range on the box to your coldest nights.

How do I read the amp and watt ratings on the label?

Trust the amp rating first, then confirm the watt rating matches it at 120 volts.

Watts equal volts times amps. A 15-amp plug is good for 1,800 watts, and a 10-amp plug for 1,200 watts. Plenty of outdoor models are 15 amps, but not all, and the number is often in small print on the plug body rather than on the front of the package. Some labels list a lower figure for motors or LED loads, so read the fine print.

Treat the rating as a ceiling. Holiday lights run for hours, which counts as a continuous load, and the common practice is to stay at or below 80 percent: 12 amps (1,440 watts) on a 15-amp plug, 8 amps (960 watts) on a 10-amp one. The weakest link sets your limit, whether that's the plug, the extension cord, or the circuit.

How do I convert light wattage to amps?

Divide the total watts by 120 and you have amps.

Find the wattage on the tag near the plug end of each string, or on the box. Add up every string you plan to run from one plug, then divide. Some tags list amps directly, which saves the math. The table shows rough figures for common sets, and your own tags win over any table.

String typeTypical watts eachTen stringsAmps for ten
LED mini, 100-count3 to 630 to 60 W0.25 to 0.5
LED C9, 25-count10 to 25100 to 250 W0.8 to 2.1
Incandescent mini, 100-count20 to 40200 to 400 W1.7 to 3.3
Incandescent C9, 25-count (7 W bulbs)1751,750 W14.6

The last row is the trap. Ten incandescent C9 strings pull nearly 15 amps, which is past the 12-amp comfort line on a 15-amp plug.

How many strings of LED lights can one smart plug run?

For LED lights, one 15-amp plug can carry more strings than you can physically connect, because each string's end-to-end limit is the tighter rule.

The math says 1,440 watts divided by 5 watts is nearly 290 mini strings. Nobody gets there. The tag on each set states how many strings can be linked in a row, and that limit exists to protect the thin wire and the first plug in the chain. Follow it. A light-duty extension cord sets a ceiling too, since many are rated for only 10 to 13 amps. Read the label on yours.

Incandescent is a different story. Mini incandescent strings often allow only a few linked sets, and C9 strings at 175 watts each cap out around eight per plug before you hit 1,440 watts. We'd pick LED for any display you plan to automate. ENERGY STAR has long promoted LED holiday lights as using a small fraction of the electricity of incandescent strings, and your plug load shrinks right along with the power bill.

How do I set a sunset timer without surprises?

Choose a sunset and sunrise schedule, and set the plug's location and time zone so it recalculates the time every day.

Fixed clock times drift out of step with the calendar. Sunset arrives well before 5 p.m. in many northern states by December, so a fixed 5:30 p.m. start leaves your yard dark for a while. A sunset timer fixes that. Add an offset of 10 to 15 minutes before sunset if you want the lights glowing as the sky fades. For the off time, a fixed hour such as 11 p.m. usually makes more sense than sunrise.

Three things trip people up:

  • Location permission. If the app can't read your location or ZIP code, the sunset time may default to something wrong. Confirm the time shown for tonight.
  • Where the schedule lives. Some plugs store schedules on the device and keep running if the internet drops. Others depend on the cloud. Check the manual, and see our guide on what still works in a power outage.
  • Clock changes. A plug with the right time zone should handle the fall and spring time changes, but verify the schedule once after any outage or change.

Matter-certified plugs, a standard from the Connectivity Standards Alliance, work across several apps, but scheduling features vary by app. If signal strength is a worry, our comparison of Wi-Fi vs Zigbee explains the tradeoffs.

Where should I mount the plug so rain and snow don't reach it?

Plug it into a GFCI-protected outlet under a weatherproof cover, with the connection well above the ground.

Current electrical code requires GFCI protection on outdoor outlets, though older houses may not have it, and a smart plug works fine on one that does. Add a while-in-use cover, the bubble-style box that closes around a plugged-in cord. Leave a drip loop in each cord so water runs off the low point instead of into the connection. Keep every connection off the ground, where snowmelt pools. Test Wi-Fi at the exact spot before you hang anything, because a plug at the far side of the house often loses signal. More cold-weather prep is in our smart lights winter checklist.

When is a smart plug the wrong tool for the job?

A smart plug is the wrong tool when your load tops about 12 amps, includes motors or heaters, or is wired into the house.

Inflatables have blower motors that draw a surge on startup, and many plugs rate motors lower than resistive loads. Heat cable and space heaters pull steady high current. Hardwired porch or roofline circuits, or anything that needs a new outdoor outlet, belong to a licensed electrician, who can also install a weatherproof timer or relay properly. A new outlet may also need a permit, depending on local code. Split a big display across two plugs instead of pushing one to its limit.

Finally, treat the plug like any connected device. Install firmware updates and use a unique password, in line with general home-device guidance from CISA.

Your next step: pull the tags off every string, total the watts, divide by 120, and compare the answer to 80 percent of your plug's amp rating.

Questions people ask

Will a smart plug work in freezing weather?

Only if its operating temperature range covers your lows. Cold can shorten the life of cheaper models and cause dropouts, so pick one with a stated low-temperature rating. Mounting it under a cover also helps.

Can a smart plug trip my GFCI outlet?

It can, usually because moisture got into a connection. If the GFCI trips, unplug everything, dry the connections, and add a better weatherproof cover before trying again. If it keeps tripping, call an electrician.

Do I need a hub to control holiday lights with a smart plug?

Not for Wi-Fi models, which connect straight to your router. Zigbee plugs need a hub, and Thread plugs need a border router. Check the box before you buy.

Can I control two separate light zones with one plug?

Only with a two-outlet outdoor model that lets you switch each outlet independently. Otherwise both zones turn on and off together. Two-outlet models also make it easier to split the load.

Should the lights stay on a plug year-round?

Take it down once the display comes off. Leaving a plug exposed through spring storms and summer heat shortens its life, and you can inspect seals and cords when you store it.

Sources and further reading

Elsewhere in Smart Home