Fix and Furrow
Advertise

Acrylic vs Glass for Framing: Which Is Better and Cheaper

Weight, fading, bumps, and shipping decide this one, and UV-filtering acrylic can undercut glass on big frames.

Save to Pinterest

We may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more

Large framed print hanging above a sofa in a bright living room with light reflecting off the glazing
Photo: Spacejoy on Unsplash

The short answer

Buy glass for small and medium frames you'll hang and leave alone: it's cheaper and scratch-resistant, and clarity is close to a tie. Buy acrylic for large frames, busy hallways, gallery walls, and anything shipped, because it weighs about half as much and doesn't shatter into shards. Add UV filtering to either if the art gets sun.

Typical cost
$5 to $550 per frame for glazing, depending on size, material, and UV or glare coatings
Time needed
About 30 minutes to swap glazing in an existing frame
Skill level
Beginner

Key points

  • Choose glass for frames under about 24x36 inches in low-traffic spots, since it costs less and resists scratches.
  • Choose acrylic for big frames, shipped frames, and hallways where bumps happen, because it weighs about half as much and doesn't shatter into shards.
  • UV-filtering glazing slows fading but doesn't stop it, so pair it with window shading or a better wall spot in a sunny room.
  • Skip acrylic over pastel and charcoal work unless it's anti-static, because static can lift loose pigment.
  • Moving from standard to UV-filtering glazing adds a few dollars on small frames and a couple hundred on large ones, and acrylic is often the cheaper way to get it.
In this guide
  1. What are acrylic and glass glazing, exactly?
  2. How do acrylic and glass compare side by side?
  3. Where does glass win?
  4. Where does acrylic win?
  5. How much do acrylic and glass cost by frame size?
  6. How do you clean acrylic and glass, and how do they age?
  7. Which should you choose? Verdicts for common situations

For most framed prints under about 24x36 inches, buy glass. For anything bigger, anything that gets bumped, and anything that has to ship, buy acrylic. Add UV filtering to either one if sunlight reaches the wall.

What are acrylic and glass glazing, exactly?

Glazing is the clear layer in front of your art, and the two real choices are glass and acrylic. Acrylic is a plastic sheet that people often call plexiglass, after a well-known brand, so a search for plexiglass vs glass for framed prints is this same comparison.

Standard picture frame glass is typically about 2 to 2.5 millimeters thick, and acrylic comes in similar thicknesses. Both are sold in standard, UV-filtering, non-glare, and anti-reflective versions. Those add-ons move the price more than the base material does.

Framers typically call UV-filtering glass conservation glass, and glass with both UV filtering and an anti-reflective coating museum glass. Comparing conservation glass vs acrylic is mostly comparing two UV filters, so check the stated UV rating and the price instead of the label.

How do acrylic and glass compare side by side?

Glass wins on scratch resistance and price, acrylic wins on weight, impact resistance, and shipping, and clarity is close to a tie. The table covers the points that actually change a buying decision.

FactorGlassAcrylic
ClarityVery clear, with a slight green tint at the edge in standard gradesVery clear, comparable to glass
UV protectionStandard blocks only some UV; UV-filtering versions are widely soldStandard blocks some UV; UV-filtering versions are widely sold
WeightHeavy; adds up fast on large framesRoughly half the weight of glass
ImpactBreaks into sharp piecesFlexes and cracks rather than shattering
ScratchesResists scratchingScratches easily
StaticMinimalAttracts dust; can lift pastel or charcoal
Glare controlNon-glare glass and museum glassNon-glare and anti-reflective acrylic
Typical costLowest for standard glazingHigher for standard, but often lower than glass once UV filtering is added
ShippingRisky; many shops won't ship large glassMuch safer

Where does glass win?

Glass wins when the frame stays put, the piece is modest in size, and you want the cheapest front that resists scratches. A microfiber cloth won't mark it, and it stays flat across a span where thin acrylic can bow.

It also wins for loose-pigment art. Pastel, charcoal, and some chalk drawings can lift toward acrylic when static builds up, leaving a faint haze on the inside of the sheet. Glass doesn't do that, so it's the default for those pieces.

Standard glass is also the cheapest glazing at nearly every size, which matters for a poster you may replace in five years.

Where does acrylic win?

Acrylic wins on weight and safety, which makes it the right choice for large frames, high-traffic spots, and anything that travels. A 24x36 frame covers about 6 square feet, so glass in that size adds roughly 7 pounds while acrylic adds closer to 3 or 4. One person can usually lift and level the acrylic version above a sofa.

The difference compounds on a gallery wall. Ten 16x20 frames glazed in acrylic instead of glass can shed roughly 10 to 15 pounds from the wall, which means less load on picture hanging hooks and drywall. Heavy frames still belong on hardware rated for their weight, anchored into studs where you can. If frames already sag or pull out, read why a picture keeps falling off the wall before you rehang anything.

Acrylic also survives bumps. A kid's hallway, a stairwell, or a frame leaning against a wall during a move are all spots where glass eventually cracks. Acrylic may scuff, but it rarely spray shards.

For online orders, acrylic is the practical choice. Glass is a common cause of damage in shipped frames, which is why many sellers use acrylic for mail orders.

How much do acrylic and glass cost by frame size?

Glazing typically costs about $5 to $15 for an 8x10 in standard glass and can top $500 for a 36x48 in UV-filtering glass. These are rough U.S. ranges for the sheet alone, and they swing with region, whether a frame shop cuts it, and shipping on oversize pieces.

Frame sizeStandard glassStandard acrylicUV-filtering acrylicUV-filtering glass
8x10$5 to $15$8 to $20$12 to $30$20 to $45
16x20$15 to $35$25 to $55$35 to $80$50 to $110
24x36$40 to $90$60 to $130$90 to $190$130 to $260
36x48$100 to $200$130 to $280$200 to $400$300 to $550

Standard glass is cheapest, but once you want UV filtering, acrylic can undercut glass, and the gap grows with frame size. That makes UV-filtering acrylic the budget way to protect a large print. Large glass also costs more to ship, which a shop will fold into the quote.

Anti-reflective coatings push either material higher, and museum glass is typically the most expensive option in the lineup. Save it for art you can't replace.

How do you clean acrylic and glass, and how do they age?

Glass cleans with ordinary glass cleaner sprayed onto a cloth, while acrylic needs a gentler approach because it scratches and can cloud. Never spray cleaner directly onto either one, since liquid runs under the edge and stains the mat or art.

For acrylic, use a clean microfiber cloth with a drop of mild soap in water or a cleaner made for plastic. Skip ammonia-based glass cleaners and paper towels, which can leave haze or fine scratches. An anti-static plastic cleaner helps keep dust off.

Glass doesn't change with age. Acrylic picks up scratches and, in some low-cost grades, can yellow slightly after years of strong sun. UV-filtering glazing slows fading but doesn't stop it, because visible light fades art too. In a sunny room, sun control at the window can matter as much as the glazing you pick, and our guide to what custom window blinds cost per window helps you price that option.

Which should you choose? Verdicts for common situations

Choose glass for small frames on quiet walls and acrylic for large, high-traffic, or shipped ones. Here's what we'd buy in the most common cases.

  • Large piece above a sofa, hung by one person: Acrylic, ideally UV-filtering. The lighter frame is easier to lift and level, and it's safer over seating if a hook ever lets go.
  • Print in a sunny south-facing room: UV-filtering glazing in either material, and for big sizes the acrylic version is usually cheaper. Add window shading too.
  • Poster in a kid's hallway: Standard acrylic. It costs a little more than glass and removes the shard risk.
  • Gallery wall: Acrylic on the larger frames, glass on small ones. You save weight where it counts and money where it doesn't.
  • Online order that must survive shipping: Acrylic. Glass is the riskier thing to put in a box.
  • Small print on a quiet wall, tight budget: Standard glass. Nothing about the spot calls for more.
  • Pastel, charcoal, or art you can't replace: Conservation glass, or museum glass if the budget allows. Ask a framer before choosing acrylic over loose-pigment work.

If you're unsure, measure your largest frame and price it in both materials at a local frame shop and an online cutter. Compare the totals against the table above, and you'll know in ten minutes which one is worth paying for.

Questions people ask

Is acrylic or glass better for a picture frame in a bathroom?

Acrylic usually holds up better because it doesn't shatter if a frame falls onto a hard tile floor or tub. Neither material protects art from steam, so seal the back of the frame and keep irreplaceable pieces out of humid rooms.

Can you put acrylic in a frame made for glass?

Usually yes, because acrylic sheets come in similar thicknesses and can be cut to the same sizes. Check that the rabbet is deep enough for the sheet plus the mat and backing, and leave a tiny gap at the edges since acrylic expands slightly with temperature.

Does UV-filtering glazing change how the art looks?

Good UV-filtering glazing is close to colorless, but some products add a faint tint you can notice next to a standard sheet. Ask a frame shop for a sample, or hold the sheet over the print before you buy.

Is museum glass worth the money?

It's worth it for valuable or irreplaceable pieces, or for art in a room with bright reflections, since it combines UV filtering with a coating that cuts glare. For a mass-produced print, standard UV-filtering glazing is usually enough.

Can I cut acrylic or glass myself?

Acrylic can be scored with a plastic-cutting tool and snapped along a straightedge, which is a reasonable beginner job if you wear eye protection. Glass is harder to cut cleanly and more dangerous, so most people order it cut to size.

Sources and further reading

Elsewhere in Decorating