Part of our Fencing and Yard Costs guide
Cost to Remove a Dead Tree Near a House in 2026
A dead tree beside a house usually costs more to remove than a healthy one of the same size. Here's why, and how to trim the bill safely.
Save to PinterestWe may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more
The short answer
A dead tree typically costs $300 to $800 to remove when it's small with clear access, and $1,500 to $6,000 or more when a medium or large tree stands near a house and needs rigging or a crane. Height, trunk diameter, distance to structures, and stump grinding drive the price. Dead wood is brittle, so expect to pay more than for a live tree.
- Typical cost
- $300 to $10,000+ depending on size, access, and crane use
- Time needed
- Half a day to two days, longer for large trees with rigging
- Skill level
- Hire a pro
Key points
- A medium or large dead tree near a house commonly runs $1,500 to $6,000 because rigging or a crane replaces simple felling.
- Height and trunk diameter set the base price, but distance to the roof, fence, and power lines moves it most.
- Stump grinding is usually quoted separately at roughly $150 to $600 per stump, so ask for it itemized.
- Homeowners insurance generally pays only after a tree damages a covered structure, not for removing a dead tree that is still standing.
- Keep DIY to small, solid, clearly separated trees; anything leaning toward a structure belongs to a certified arborist.
In this guide
- How much does it cost to remove a dead tree near a house?
- Why do height and trunk diameter change the price?
- How do location and access change the bill?
- What do crane, rigging, and stump grinding add?
- How can you lower the price without cutting corners?
- When is DIY safe, and when do you call an arborist?
- Does insurance pay to remove a dead tree?
Expect to pay roughly $300 to $1,200 for a small dead tree and $1,500 to $6,000 for a medium or large one beside a house, with very large trees running higher. Those are typical U.S. ranges, and they shift by region. The spread comes less from the tree than from what it could hit on the way down.
How much does it cost to remove a dead tree near a house?
Removal runs from about $300 for a small, easy tree to $10,000 or more for a very large one crowded against a structure. The table splits typical ranges by size and by whether the tree has a clear drop zone.
| Tree size | Height and trunk | Clear access | Near house, fence, or lines |
|---|---|---|---|
| Small | Under 30 ft, under 12 in. wide | $300 to $800 | $500 to $1,200 |
| Medium | 30 to 60 ft, 12 to 24 in. | $800 to $2,000 | $1,500 to $3,500 |
| Large | 60 to 80 ft, 24 to 36 in. | $1,800 to $3,500 | $3,000 to $6,000 |
| Very large | Over 80 ft, over 36 in. | $3,000 to $6,000 | $5,000 to $10,000+ |
Some sites quote removal by the foot of height. Treat that as a sanity check, not a bid. A 60-foot tree in an open field and a 60-foot tree over a garage are not the same job.
Materials barely figure in. The bill is crew labor, equipment such as a bucket truck or chipper, and haul-off fees.
Why do height and trunk diameter change the price?
Height and trunk diameter set the base price because they determine how much wood has to be cut, lowered, and hauled away. The price climbs in steps, not a smooth line. A tree under about 30 feet may need only one climber. Past 60 feet, expect more crew, more rope work, and heavier equipment.
Diameter matters as much as height. A 40-foot tree with a 30-inch trunk carries far more weight than a 40-foot tree with a 12-inch trunk, and every cut section has to be lowered under control rather than dropped.
Why does a dead tree often cost more than a live one?
A dead tree often costs more because the wood is brittle and unpredictable. Branches that look solid can snap under a climber's weight or a rope's load, and rot can hide inside the trunk. Crews may skip climbing altogether and use a bucket truck or crane instead. Many companies price that added risk and slower pace into the quote, sometimes by several hundred dollars on a mid-size tree.
How do location and access change the bill?
Distance to structures is the biggest swing factor, because a tree that can be felled whole is far cheaper than one taken down in pieces. If the tree has a clear lane to fall, the crew cuts it at the base and processes the trunk on the ground. If a roof, pool, fence, or power line sits in the fall zone, every limb gets roped and lowered.
Other access issues add up:
- Gates and side yards. If a truck or chipper can't reach the tree, crews carry wood out by hand, which adds hours.
- Slopes and soft ground. Heavy equipment may need ground protection mats, and some lawns can't take a bucket truck at all.
- Power lines. Work near energized lines calls for qualified line-clearance crews or a utility shutoff. Call your utility and leave it alone.
- Season and demand. Emergency calls after a storm often cost noticeably more than routine work.
Local rules matter too. Some cities require a permit to remove trees above a certain trunk size, even dead ones, and a few want documentation that the tree is dead. Check with your municipality before you book.
What do crane, rigging, and stump grinding add?
A crane typically adds $1,000 to $3,000 or more, and stump grinding adds roughly $150 to $600 per stump. Both usually show up as separate line items.
| Add-on | Typical cost | What drives it |
|---|---|---|
| Crane | $1,000 to $3,000+ (often hourly, with a minimum) | Crane size, setup time, street access, travel |
| Bucket truck | $200 to $800 added | Reach, ground conditions |
| Stump grinding | $150 to $600 per stump | Stump width, roots, rocks, access |
| Wood and brush haul-off | $100 to $500 | Volume, distance to dump |
| Permit | $0 to $200 | Local rules |
For a tall, hollow, or badly decayed tree close to a house, crane tree removal is usually the safer choice. The crew lifts sections off the trunk without climbing it, which is often faster than hand rigging. For a large dead tree leaning over a roof, we'd pick the crane quote even if it looks higher on paper. Compare it against the cost of a new roof.
Stump grinding is optional, but a dead stump can host fungus and insects, and it's a trip hazard. A stump grinder commonly chews 6 to 12 inches below grade, and the chips can be used as mulch or hauled off. If you plan to replant in the same spot, grind it.
How can you lower the price without cutting corners?
You save the most by shrinking the work and comparing itemized quotes, not by hiring the cheapest unlicensed operator. Start with three written quotes, and ask each to itemize removal, cleanup, haul-off, and stump grinding so you compare like with like.
A few other moves help:
- Keep the wood. Leaving logs on site or accepting chips from the wood chipper can cut haul-off charges. Ask the arborist what killed the tree before you burn or move the wood, since some pests and diseases spread that way.
- Clear the work area. Move cars, patio furniture, and play equipment so the crew doesn't bill time for it.
- Book off-peak. Demand often dips in the slow season, depending on your region. A stable dead tree can usually wait a few weeks. One that's actively leaning can't.
- Bundle jobs. A second tree or an old stump handled in the same visit often costs less than two trips.
Don't save on insurance or credentials. Ask for proof of liability and workers' compensation coverage, and look for a certified arborist through the International Society of Arboriculture. An uninsured crew that drops a trunk on your house leaves you holding the bill.
When is DIY safe, and when do you call an arborist?
DIY is safe only for small, solid trees with a wide clear fall zone, and everything else should go to a certified arborist. Think a dead tree under about 15 feet with a trunk under 6 inches, no lean, no rot, and no structures or lines within twice its height. Check local permit rules first.
Not sure the tree is dead? The Arbor Day Foundation has tree-health resources, and an arborist can confirm.
Even a small tree demands gear and a plan: chainsaw chaps, a helmet with face shield, hearing protection, gloves, and an escape path at roughly 45 degrees away from the fall line. Cut a notch on the fall side before the back cut. A pole saw keeps your feet on the ground for small dead limbs.
The risks are real. Brittle limbs can break loose above you (often called widowmakers), a trunk can split upward as it falls, and a saw you rarely use can kick back. Call a pro if any of these apply:
- The tree leans toward a house, fence, shed, or vehicle.
- It's taller than about 15 feet or the trunk is wider than about 6 inches.
- Any part is near power lines.
- The trunk is hollow, split, or has mushrooms or crumbling bark at the base.
- You'd need a ladder to reach the cuts.
Does insurance pay to remove a dead tree?
Homeowners insurance usually pays for tree removal only after a tree has fallen and damaged a covered structure, and it rarely pays to take down a dead tree that is still standing. Insurers generally treat standing dead trees as maintenance. What tree removal insurance covers varies by policy, so read yours or call your agent.
Common patterns, though not universal:
- Tree hits a house, garage, or other covered structure: the policy often covers repair and tree removal, usually with a per-tree or per-event cap, often a few hundred to a couple thousand dollars.
- Tree falls but hits nothing: typically not covered, though some policies pay if it blocks a driveway or access.
- Dead tree you knew about: an insurer may question a claim if the tree was visibly dead and you never dealt with it.
That last point is a reason to act early. If a storm brings a tree down, photograph everything before work starts, make only temporary safety repairs, and call your insurer before signing for full removal. A neighbor's dead tree that lands on your property is usually handled through your own policy, though liability can shift if they ignored a known hazard, and the rules vary by state.
Your next step: photograph the tree, note its height and distance to the nearest structure, and send those details to three licensed, insured arborists for written quotes this week.
Questions people ask
How do I know if a tree is dead and not just dormant?
Scratch a small twig with a fingernail. Green tissue underneath means it's alive, while brown and dry means it's likely dead. Peeling bark, fungus at the base, and branches that snap with no flex point the same way, and a certified arborist can confirm.
Do I need a permit to remove a dead tree on my own property?
It depends on your city or county. Some require permits above a certain trunk size, and some waive or speed them up for dead or hazardous trees if you document the condition. Call your local planning or forestry office before you book.
Can I rent a crane or bucket truck myself?
You can rent some lifting equipment, but operating it near a house is not a DIY job. Crane work takes trained operators, rigging knowledge, and liability coverage. Hire a tree service that brings its own equipment and insurance.
How long can a dead tree stand before it becomes dangerous?
There's no fixed timeline, because it depends on the species, the cause of death, and the weather. A solid tree far from structures can often wait for a scheduled visit. One that leans, cracks, or hangs over a roof should be treated as urgent, and an arborist can assess it.
What's the difference between a tree service and a certified arborist?
Anyone can call themselves a tree service. An ISA certified arborist has passed an exam through the International Society of Arboriculture and must keep up continuing education. Certification doesn't replace insurance, so still ask for proof of coverage.
Sources and further reading
- International Society of Arboriculture (TreesAreGood) Find certified arborists and hiring advice for tree work
- 811 Call Before You Dig Free utility marking before stump grinding or digging
- Arbor Day Foundation Tree health and care guidance from a long-standing nonprofit
Was this article helpful?