Fix and Furrow
Advertise

Landscape Lighting Timer vs Photocell vs Smart Controller

Your transformer may already include the control you're about to buy, and a plain clock timer will drift out of sync with sunset.

Save to Pinterest

We may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more

Low-voltage landscape lighting transformer with a timer mounted on an exterior wall near garden path lights
Photo: emteekay on Unsplash

The short answer

For most single-transformer, low-voltage systems, use an astronomical timer ($25 to $80 as a plug-in, or built into your transformer). A photocell is enough for dusk-to-dawn lighting. A plain clock timer drifts from sunset by minutes every week. Pay for a smart controller only if you need multiple zones, remote control, or phone scheduling.

Typical cost
$10 to $80 for most setups; $150 to $500 or more for zone-level smart control
Time needed
30 minutes to an hour
Skill level
Beginner

Key points

  • Check your transformer first, because many include a photocell input, a digital timer, or both.
  • A plain clock timer fires at the same clock time all year, so it needs resetting as sunset shifts.
  • A photocell is the simplest way to get lights on at dusk, but alone it can't pick an off time.
  • An astronomical timer tracks sunset automatically and is the best default for one transformer and one zone.
  • Smart controllers earn their price with multiple zones or remote access, not for a single lighting run.
In this guide
  1. What control options exist for landscape lighting?
  2. Why does a plain clock timer drift out of sync with sunset?
  3. When is a landscape lighting photocell enough?
  4. How does an astronomical timer work?
  5. When does a smart controller pay off?
  6. Which features matter and which are marketing?
  7. How do the control types compare on price and use?
  8. What should you buy for one transformer and one zone?

Check the transformer before you buy anything. Many low-voltage landscape lighting transformers ship with a photocell input, a built-in digital timer, or both, so the control you're shopping for may already be on your garage wall. Look for a dial, a small display, or a jack labeled 'sensor' or 'photocell'. If you find one, read the manual first.

What control options exist for landscape lighting?

Four kinds of control cover nearly every yard: mechanical timers, photocells, astronomical timers, and smart controllers. All of them switch power to the transformer. They differ in what triggers the switch. A clock follows the hour, a photocell follows daylight, an astronomical timer follows a calculated sunset, and a smart controller follows whatever you set in an app.

Most are built into the transformer or sit between the outlet and the transformer plug. That second option means you can upgrade an old system without touching any low-voltage wire. The landscape lighting timer vs photocell choice comes down to whether you want the lights tied to the clock or to the actual light outside.

Why does a plain clock timer drift out of sync with sunset?

A plain clock timer drifts because it switches at the same clock time every day, while sunset moves by a minute or two daily in spring and fall. Around the equinoxes that adds up to roughly 5 to 15 minutes a week at mid-northern latitudes, and the exact figure depends on where you live. Daylight saving changes add a full hour.

Set a mechanical timer for 8:30 p.m. in June and it works. By December, sunset can come several hours earlier, so the lights switch on long after dark. Set it for December and in summer they glow in broad daylight.

A mechanical timer, the dial type with movable pins, costs about $10 to $25. A basic digital timer runs about $15 to $40 and adds multiple programs, but it still uses fixed clock times. Either is fine if you enjoy adjusting it every few weeks. Most people don't.

When is a landscape lighting photocell enough?

A landscape lighting photocell is enough when you want lights on at dusk and off at dawn and don't care about the hours in between. The sensor reads daylight, so it follows the seasons without programming. Standalone and plug-in photocells typically run $10 to $30, and many transformers accept one on a small cable.

The limit is that a photocell alone can't choose an off time. Dusk to dawn means well over 12 hours of runtime in a northern winter. LED fixtures use little power, so the electric bill barely moves, but you're wearing out fixtures for lighting nobody sees at 3 a.m.

Placement causes most of the grief. The sensor needs honest sky light. Tuck it under an eave, point it at a porch light, or let your own fixtures shine on it, and it will cycle on and off or never turn on. Face it toward open sky, away from your own light, and wipe the lens a couple of times a year.

The better version pairs the photocell with a timer. Many transformers let you choose 'on at dusk, off after 4, 6, or 8 hours' or 'off at a set time'. If yours does, you already have most of what an astronomical timer offers.

How does an astronomical timer work?

An astronomical timer calculates sunset and sunrise for your location and the date, then switches your lights on at sunset every day with no adjustment. You enter your ZIP code or latitude and longitude plus your time zone, and the unit does the math. Many models also handle daylight saving automatically.

A good astronomical timer lets you add an offset, such as on 15 minutes after sunset, and set a fixed off time like 11 p.m. Outdoor-rated plug-in models typically cost $25 to $80. Look for battery backup. Without it, a power outage can wipe the clock and leave the lights dark or mistimed until you notice.

Compared with a photocell, there's no sensor to get dirty, shaded, or fooled by a neighbor's floodlight. The trade-off is that it ignores actual conditions. A dark storm at 3 p.m. won't turn the lights on, while a photocell would.

When does a smart controller pay off?

A smart controller pays off when you have more than one zone, want to change schedules from your phone, or want the lights linked to other devices. For one transformer running one set of fixtures, it's usually money spent on features you won't use.

There are two tiers. A smart plug in front of the transformer, about $15 to $40, adds app scheduling and often sunset-based timing, but it switches the whole system as one block. A true smart controller for landscape lighting, either an app-enabled transformer or a zone controller, runs about $150 to $500 or more and lets you schedule, dim, or switch individual zones separately.

Know the weak points. Wi-Fi often reaches poorly to an outdoor wall or garage, and a controller that drops offline may stop following its schedule. Some depend on a manufacturer's cloud service, so a discontinued app can strand the hardware. Look for local schedule storage so the lights still run on time without internet.

Which features matter and which are marketing?

The features that matter are load rating, weather rating, an off-time option, and power-outage backup. Sunset-based timing matters too, and everything else is mostly decoration for a typical yard.

  • Load rating: A transformer is an inductive load, so the timer's rating should cover the transformer's wattage or amperage, ideally with room to spare.
  • Weather rating: Outdoor use needs a wet-location rating, not just a plastic housing.
  • Offset and off time: Being able to set 'on at sunset, off at 11 p.m.' is the feature you'll use daily.
  • Battery or capacitor backup: It keeps the clock correct through outages.
  • Manual override: A simple on switch comes in handy when you have guests.

The marketing list is longer: voice assistants, dozens of preset scenes, cloud accounts, color effects. Those matter only if you run color-changing fixtures. A low voltage landscape lighting timer that nails the first list beats a pricey app with a thin build.

If fixtures at the far end of the run look dim, no controller will fix that. It's voltage drop, a wire-gauge and layout problem.

How do the control types compare on price and use?

Control types fall into three price tiers: under $30 for basic clock or sensor control, $25 to $80 for sunset-tracking timers, and $150 or more for zone-level smart control. These are typical U.S. ranges, and outdoor rating, load capacity, and brand move them.

Control typeTypical priceTracks sunset?Best forMain drawback
Mechanical timer$10 to $25NoLowest-cost fixed scheduleNeeds seasonal resetting
Digital timer$15 to $40NoMultiple fixed programsStill drifts from sunset
Photocell$10 to $30Yes, by light levelSimple dusk-to-dawn lightingShade and stray light errors; no off time alone
Astronomical timer$25 to $80Yes, calculatedOne transformer, one zoneClock can reset after outages without backup
Smart plug$15 to $40OftenPhone control of a single circuitWhole system on one switch; Wi-Fi reliance
Smart zone controller$150 to $500+YesMultiple zones, dimming, remote accessCost, setup, app dependence

What should you buy for one transformer and one zone?

For one transformer and one zone, we'd pick an astronomical timer, whether built into the transformer or plugged in ahead of it, and skip smart control. It gets you sunset-tracking lights with an off time you choose, and nothing needs adjusting after the first setup.

  1. Check your transformer. If it has a photocell input and a timer, use both: on at dusk, off after a set number of hours. You don't need to buy anything.
  2. If it has no controls, add an outdoor-rated plug-in astronomical timer with a load rating above your transformer's wattage and battery backup.
  3. If you only want dusk to dawn, a landscape lighting photocell is a fine $10 to $30 fix. Mount it where it sees open sky.
  4. If you want phone control or separate zones, step up to a smart plug for a single circuit or a smart controller for several.

Skip the mechanical timer unless it's a stopgap. It's the one option that keeps asking for your attention, which is the opposite of what a control is for.

Your next step is small: photograph the transformer's label and controls, note its wattage and any sensor jack, and compare that to the options above before you shop. If you're still laying out the system, size the transformer first. The control choice follows from it.

Questions people ask

Can I put a smart plug on my landscape lighting transformer?

Often yes, if the plug is rated for outdoor use or sits in a weatherproof cover, and its load rating exceeds the transformer's. Leave the transformer's own switch on. You get whole-system control only, so you can't separate zones this way.

How many hours a night should landscape lights run?

Few places regulate it, though some communities have outdoor lighting ordinances, so check yours. Many homeowners run lights from sunset until 10 or 11 p.m. Pick the hours based on when you actually use or see the yard.

What happens to an astronomical timer when the power goes out?

Models without backup can lose their clock and reset to a default or stop switching correctly. Units with a battery or capacitor keep time through short outages. After any outage, glance at the display to confirm the time is right.

How do I know a timer's load rating is enough for my transformer?

Find the wattage on the transformer's nameplate and compare it with the timer's rating in watts or amps. As a rough conversion, a 300-watt transformer draws up to about 2.5 amps at 120 volts. Choose a timer rated comfortably above that.

Can I use a regular indoor timer for outdoor lights?

Only if it's rated for wet locations or sits inside a proper weatherproof enclosure. A standard indoor timer isn't built for rain or condensation. Check the packaging for an outdoor or wet-location rating before you plug it in.

Sources and further reading

Elsewhere in Landscaping