Security Camera Installation Cost: Pro vs DIY Pricing
Labor and cable often cost more than the cameras, and one hard cable run can swing the whole bill.
Save to PinterestWe may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more
The short answer
Professional installation of wired PoE cameras typically runs $150 to $600 per camera in labor, or roughly $350 to $900 per camera once the camera, cable, and recorder share are included. A four-camera system usually lands between $1,500 and $4,500. DIY often cuts that to $500 to $1,400, but only if the cable can be routed without fishing through finished walls.
- Typical cost
- $1,500 to $4,500 professionally installed for four cameras; $500 to $1,400 DIY
- Time needed
- One weekend DIY for four cameras; about one day for a professional crew on easy runs
- Skill level
- Intermediate
Key points
- Labor for a wired PoE camera typically runs $150 to $600 per camera, and the cable path matters more than the camera model.
- Drilling brick or stucco, fishing cable through finished walls, and patching drywall are the charges quotes most often bury.
- A four-camera DIY install commonly costs $500 to $1,400 versus $1,500 to $4,500 professionally, if your runs are easy.
- The best split for most homeowners is to DIY the easy runs and hire out the one or two hard ones.
- Get itemized quotes per run, not a single per-camera number, so you can compare them fairly.
In this guide
- What does a professional security camera installation include?
- How much does security camera installation cost by item?
- What pushes the price up?
- What pushes the price down?
- How can you cut installation costs without cutting corners?
- DIY vs professional security camera installation: where does DIY save money?
- When is hiring an electrician worth the extra money?
A professionally installed wired camera typically costs $350 to $900 all-in, and the camera itself is often only $60 to $300 of that. The rest is cable, labor, recorder share, and whatever your walls demand. A quote that lists only hardware can turn a $1,200 kit into a $2,800 invoice.
What does a professional security camera installation include?
A standard professional install covers mounting each camera, running Ethernet cable to a central point, connecting a recorder and switch, and setting up viewing on your phone. Anything beyond that should be itemized.
PoE cameras carry power and video over a single Ethernet cable, so you don't need an outlet at each camera. The cable runs back to a network video recorder (NVR) or a PoE switch, usually in a closet, basement, or garage. A good installer also sets a strong admin password and updates firmware. CISA's guidance on connected devices makes the same point: change default credentials and keep firmware current, whoever does the install.
Watch for what's left out. Hard drives are sometimes sold separately, drywall patching is rarely included, and a new outlet near the recorder is a separate electrical job.
How much does security camera installation cost by item?
Expect roughly $150 to $600 in labor per camera, plus equipment and materials that scale with system size. The table shows the pieces that tend to appear on quotes. These are rough U.S. ranges; your market and the installer's minimum service call, often $100 to $250, will move them.
| Item | DIY materials | Professional installed |
|---|---|---|
| PoE camera (bullet or dome), each | $60 to $300 | $150 to $600 labor plus the camera |
| Easy cable run (attic, soffit, or basement access) | $20 to $60 in cable | $100 to $350 per run |
| Hard cable run (finished walls, second floor, long distance) | $30 to $90 plus specialty bits | $250 to $600 per run |
| Network video recorder, 4 to 8 channels | $150 to $600 | $100 to $300 setup, plus the unit |
| Surveillance hard drive, 2 to 8 TB | $60 to $200 | Usually billed at cost plus markup |
| PoE switch, 8 port (if not built into the NVR) | $60 to $300 | $50 to $150 to install |
| Drilling brick, block, or stucco, per hole | $20 to $50 for a masonry drill bit | $50 to $200 per hole |
| Drywall patch and paint, per hole | $15 to $40 in supplies | $75 to $250 |
| New outlet near the recorder | Not a DIY job for most people | $150 to $400 from a licensed electrician |
Put it together and a four-camera system typically runs $1,500 to $4,500 professionally installed, and eight cameras $3,000 to $8,000. Those numbers assume mostly accessible routes. A few difficult runs will push you past the top.
What pushes the price up?
Cable length, masonry, and finished walls are the three biggest drivers, and any one of them can add a lot of labor to a single camera.
Length matters because Ethernet is limited to about 328 feet (100 meters). A camera on a detached garage or back fence may need a second switch or a buried cable. For ground runs, use outdoor-rated direct burial cable, often pulled through conduit, and check local code for burial depth. Call 811 before you dig, whoever holds the shovel.
Brick, block, and stucco need a hammer drill and patience, and a pro will charge for bit wear and for sealing each hole against water. Finished walls are slower still. Fishing cable down an insulated, fire-blocked wall with no attic access may mean an access hole you'll pay to patch, which is why a camera above the garage of a two-story house is the classic budget breaker.
Premium varifocal cameras, mounts that need a tall ladder or lift, and rush scheduling add more.
What pushes the price down?
Existing wiring, bundled jobs, and easy access cut labor the most. An open soffit, an unfinished basement, or an attic directly above the camera can turn a $500 run into a $150 one.
Some installers can reuse coaxial cable from an older analog system with compatible cameras or adapters, but only if the cable is in good shape, so ask before assuming. Many also discount per-camera labor when you're adding four or more, or when the same visit covers a video doorbell. And a camera near the recorder or router needs a short run. Short runs are cheap runs.
How can you cut installation costs without cutting corners?
Get itemized quotes, place cameras where the cable path is easy, and buy the hardware yourself if the installer allows it. Together those can trim a few hundred dollars or more.
- Ask for per-run pricing. A flat per-camera number hides which runs are hard. Per-run pricing lets you skip or relocate the expensive one.
- Move one camera. Shifting a mount 10 feet to sit under an eave instead of on a brick face can eliminate a masonry hole.
- Skip the markup on storage. A surveillance hard drive is a commodity part. A local NVR also avoids monthly fees; our guide to cloud versus local storage costs covers the tradeoffs.
- Do the prep yourself. Clearing attic access, pulling cable to the attic hatch, or patching and painting afterward trims billable hours.
- Consider a matched camera kit. A camera kit with an NVR and pre-paired cameras often costs less than buying parts, and it removes compatibility guesswork.
DIY vs professional security camera installation: where does DIY save money?
DIY saves the most when your cable runs are easy, often $1,000 or more on a four-camera system, and it backfires when one bad run turns into a repair bill.
A realistic DIY budget for four cameras is $500 to $1,400. That covers a camera kit or individual cameras, outdoor-rated Cat5e or Cat6 cable (roughly $50 to $200 depending on length and rating), a termination kit and cable tester, a drill, and a masonry drill bit if you need one. If you're comfortable on a ladder and have attic or soffit access, it's a solid weekend project. Choose cameras that support open standards so they aren't locked to one recorder.
Here's the rule we'd use. DIY the job if at least three of every four runs can be pulled through open attic, soffit, crawlspace, or along the exterior surface. Hire out any run that needs fishing through a finished, insulated wall. A professional's $250 to $600 for that run can be cheaper than buying a long flex bit and fish tape, losing a Saturday, and then paying $150 to patch a hole in the wrong place.
That hybrid approach is our pick for most homeowners. Pull the easy cables, mount and configure the cameras, and have a pro handle the one or two ugly paths. Many installers will take a single run for their service-call minimum, though policies vary, so ask first.
One more DIY trap is leaving the system on default settings. Consumer advice from the FTC on connected devices stresses strong, unique passwords and regular software updates, and that matters more for a camera than for almost anything else you plug in. Poor night images are another common complaint; our piece on washed-out night vision covers placement fixes to try before you pay for a reposition.
When is hiring an electrician worth the extra money?
Hiring a licensed pro is worth it whenever the job touches household power, involves structural drilling, or follows a path you can't see. PoE cable itself is low voltage, but the work around it often isn't.
Bring in an electrician or a low-voltage electrician when you need a new outlet for the recorder or switch, when cable must pass near line-voltage wiring in a wall, or when you're drilling into an older home where hidden wiring can't be ruled out. Electricians commonly charge $65 to $150 an hour, and small jobs often carry a minimum. Local codes decide whether low-voltage work needs a permit, some areas require fire-stopping where cable passes through fire-blocked framing, and some states license low-voltage contractors separately. Ask your building department rather than assuming.
Next step: walk your property and mark each camera spot as easy, medium, or hard based on its cable path. Then request itemized quotes from two or three local installers for just the hard ones, and compare that total against the DIY budget above.
Related guide: Wired Security Camera System Installation: A Planning Guide
Questions people ask
Is PoE camera installation cheaper than wireless camera installation?
Wired PoE usually costs more up front because of the cable work. In return you get one cable for power and video, no batteries to recharge, and a more reliable feed. Wireless cameras are cheaper to mount, but they need a battery or an outlet at each spot.
How long does a professional security camera installation take?
A crew can often install four cameras in four to eight hours when the cable paths are open. Finished walls, masonry, or a two-story layout can stretch that to a full day or two. Ask for a time estimate per run, not just a total.
Do wired security cameras need internet to work?
PoE cameras record to a local recorder without internet. You need a connection only for remote viewing and alerts on your phone. If your router goes down, recording usually continues.
How many cameras does a typical house need?
Most homes start with cameras covering the front door, back door, and driveway or garage. Add more only where you have a specific blind spot, since every extra camera adds a cable run and its labor. Starting with fewer and expanding later is usually cheaper than overbuying.
Can PoE cameras run on a regular network switch?
Not without help. A standard switch doesn't supply power, so you need a PoE switch, a recorder with built-in PoE ports, or a PoE injector at each camera. Check that the power rating of the switch or recorder covers all your cameras.
Sources and further reading
- CISA Federal guidance on securing connected devices and changing default passwords.
- FTC Consumer Advice Consumer advice on protecting smart devices and personal data.
Was this article helpful?