Fix and Furrow
Advertise

Space Heater Cost to Run Per Hour (and When It Saves Money)

Wattage times your rate gives the hourly cost. Your heating system and circuit limit decide whether a heater is worth it.

Save to Pinterest

We may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more

Portable ceramic space heater plugged into a wall outlet in a living room
Photo: e24 on Unsplash

The short answer

A 1,500-watt space heater costs about 18 to 38 cents per hour at electricity rates of 12 to 25 cents per kilowatt-hour, or roughly 26 cents at 17 cents. Multiply the heater's kilowatts by your rate. It beats the furnace only when it heats one occupied room while you turn the central thermostat down.

Typical cost
About $0.09 to $0.38 per hour, or $20 to $90 per month at 8 hours a day
Time needed
Five minutes to calculate
Skill level
Beginner

Key points

  • Hourly cost equals the heater's kilowatts times your price per kilowatt-hour, which puts a 1,500-watt unit at roughly 18 to 38 cents per hour at common U.S. rates.
  • Ceramic, oil-filled, and infrared heaters turn electricity into heat at essentially the same rate, so wattage matters far more than type.
  • A heater saves money only when it lets you lower the central thermostat while you heat the one room you're using.
  • A 1,500-watt heater draws about 12.5 amps, so it belongs on a 15-amp circuit by itself and plugged straight into the wall.
  • A built-in thermostat or a plug-in timer stops the heater from running once the room is warm, which is where most of the savings are.
In this guide
  1. What does the wattage on a space heater actually mean?
  2. Where do I find my electricity rate on my utility bill?
  3. How do I calculate space heater cost per hour?
  4. Do ceramic, oil-filled, and infrared heaters cost different amounts to run?
  5. Is a space heater cheaper than running the furnace?
  6. Why is 1,500 watts the ceiling on a standard circuit?
  7. How do I use a thermostat or timer to cut the bill?

A 1,500-watt space heater uses 1.5 kilowatt-hours of electricity for every hour it runs at full power. At 17 cents per kilowatt-hour, that's about 26 cents an hour.

What does the wattage on a space heater actually mean?

The wattage is how much electricity the heater pulls while it's on, and nearly all of it comes out as heat. A 1,500-watt unit puts out about 5,100 BTU of heat per hour. Electric resistance heaters are close to 100 percent efficient at the plug, so there's no efficiency gap to shop for between models.

Find the number on the label near the cord or on the box. Most portable heaters offer a low setting (often 750 or 900 watts) and a high setting of 1,500 watts. Small desk and under-desk models run 200 to 400 watts.

Where do I find my electricity rate on my utility bill?

Your rate is the price per kilowatt-hour (kWh), listed in the charges section of your bill or your utility's online account. For the most honest figure, divide total charges by total kWh used, since that folds in delivery fees and taxes.

Residential rates run from roughly 12 cents per kWh in lower-cost regions to 30 cents or more in the highest-cost states. Some utilities use tiered or time-of-use pricing, so a heater running on winter evenings may cost more than your average. Check your own plan before trusting any national figure, including the ones here.

How do I calculate space heater cost per hour?

Divide the wattage by 1,000 to get kilowatts, then multiply by your price per kWh. A 1,500-watt heater at 17 cents works out to 1.5 x $0.17, or about $0.26 per hour.

Heater settingAt 12 cents/kWhAt 17 cents/kWhAt 25 cents/kWh
750 watts$0.09$0.13$0.19
1,000 watts$0.12$0.17$0.25
1,500 watts$0.18$0.26$0.38

Run time is what turns pennies into real money. Eight hours a day for 30 days at 1,500 watts is 360 kWh, or about $61 a month at 17 cents. That's the ceiling, because a thermostat-controlled heater cycles off once the room is warm.

Do ceramic, oil-filled, and infrared heaters cost different amounts to run?

No. At the same wattage they cost the same to run, because every electric resistance heater converts power to heat at the same rate. A 1,500-watt ceramic space heater and a 1,500-watt oil-filled radiator draw identical power while they're on.

What differs is how the heat behaves. A ceramic heater with a fan warms the air near you quickly. An oil-filled radiator takes longer to get going, then keeps radiating after its thermostat shuts off, so it cycles less. An infrared heater warms people and objects directly, which can feel good in a drafty workshop but does little for the room's air. Pick by how you'll use it, not by claims about lower electricity use.

Is a space heater cheaper than running the furnace?

Per unit of heat, a space heater usually costs more than a gas furnace or a heat pump, and it only wins when it replaces heat you'd otherwise send to rooms nobody's using.

Here's the rough comparison for 100,000 BTU of delivered heat, using illustrative prices of 17 cents per kWh and about $1.60 per therm of natural gas. Your local prices will move these numbers.

Heat sourceApproximate cost per 100,000 BTU
Electric space heater or electric furnaceAbout $5.00
Gas furnace (80 to 95 percent efficient)About $1.70 to $2.00
Heat pump (coefficient of performance of 2.5 to 3)About $1.70 to $2.00

If your house has gas heat or a heat pump, running one heater all day to avoid the furnace costs more, not less. The math flips in one situation: you're in a single room for hours, like a home office, and you drop the central thermostat several degrees. The U.S. Department of Energy says turning a thermostat back 7 to 10 degrees for eight hours a day can save as much as about 10 percent a year on heating and cooling. The heater covers the room you're in while the rest of the house coasts.

We'd pick that approach for most households: lower the thermostat, run one 750 to 1,500-watt heater in the occupied room, and shut the door. If your home already heats with electric baseboards or an electric furnace, the costs are close to even, and a heater in the room you use is the easier win.

Why is 1,500 watts the ceiling on a standard circuit?

A 15-amp circuit at 120 volts supplies 1,800 watts at most, and a 1,500-watt heater uses about 12.5 amps of it. A common rule of thumb limits continuous loads to 80 percent of the breaker rating, or 12 amps on a 15-amp circuit, so a heater at full power already sits just above that line.

Plug a vacuum, hair dryer, or microwave into the same circuit and you'll probably trip the breaker. A circuit that runs near its limit for hours also heats the wiring and the outlet. Treat the heater as the only load on its circuit, and check the panel labels to learn which outlets share it.

Look for a UL listing mark, tip-over shutoff, and overheat protection. Keep the heater at least 3 feet from bedding, curtains, and furniture. Never leave one running in an empty room or while you sleep unless the manufacturer says it's designed for that. Retire any heater with a frayed cord or cracked plug.

How do I use a thermostat or timer to cut the bill?

A space heater thermostat cuts the bill by switching the heating element off once the room reaches your set temperature, so the heater stops drawing 1,500 watts for the whole hour. It doesn't make heat cheaper. It stops you from buying heat you don't need.

Here's the arithmetic: a heater running flat out for 8 hours uses 12 kWh, about $2.04 at 17 cents. If a thermostat holds the room at 68 degrees and the heater runs half the time, that drops to about $1.02. Real savings depend on room size, insulation, and drafts.

We'd pick a model with a digital thermostat over one with only low, medium, and high. Three habits help:

  • Add a plug-in timer rated for the heater's wattage to warm a room before you arrive.
  • Seal gaps around doors and windows first, because a heater fights every leak.
  • Keep the heater on its own circuit, and leave any breaker that keeps tripping to a licensed electrician.

Your next step: grab your last bill, find your price per kWh, and run the formula for the heater you already own. If the number looks high, drop the central thermostat 5 degrees and put the heater on a timer.

Questions people ask

How much does a space heater add to my electric bill per month?

A 1,500-watt heater running 8 hours a day costs about $60 a month at 17 cents per kWh if it runs continuously. A thermostat that cycles it off can cut that substantially. Your actual number depends on your rate and room size.

Is it cheaper to leave a space heater on all night?

Not usually. Eight hours overnight costs the same as eight hours in the day, and unattended heaters are a fire risk. Setting back the furnace thermostat and adding warm bedding is a safer way to keep a bedroom comfortable.

Do low-wattage space heaters save money?

They draw less power per hour, but they also deliver less heat, so a 750-watt unit may never warm a large room. They work for small spaces, desks, and bathrooms. For a big room, a 1,500-watt model with a thermostat cycles off sooner and may cost about the same.

Why does my space heater keep tripping the breaker?

Usually another device shares the circuit, and the combined load passes 15 amps. Unplug everything else on that circuit or move the heater to an outlet on a different one. If it trips with the heater alone, or the outlet feels warm, stop using it and call a licensed electrician.

Is a heat pump cheaper than a space heater?

Yes, per unit of heat. A heat pump moves heat rather than creating it, so it delivers roughly two to three times as much heat per kWh as a resistance heater, depending on outdoor temperature. If you have one, a space heater rarely saves money.

Sources and further reading

Elsewhere in Appliances