Fix and Furrow
Advertise

Patio Cushion Replacement Cost in 2026: Refoam or Buy New?

Per-seat prices for foam, fabric, and zippers, plus a rule of thumb for when keeping your frame beats buying a new set.

Save to Pinterest

We may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more

Deep seating patio chairs with fresh outdoor cushions on a backyard patio
Photo: Steven Ungermann on Unsplash

The short answer

Replacing patio cushions typically costs $25 to $80 per dining seat cushion and $80 to $450 per deep seating seat-and-back pair, depending on fabric and whether you buy ready-made or custom. Keep a sound frame when cushion costs stay under roughly half the price of a comparable new set.

Typical cost
$25 to $450 per seat, depending on size, fabric, and custom vs ready-made
Time needed
One weekend for DIY; one to three weeks for a custom upholstery shop
Skill level
Intermediate

Key points

  • Fabric is usually the biggest line item per seat, foam is second, and zippers or ties barely register at $3 to $20 per cushion.
  • Dirty cushions need cleaning, faded covers need recovering, and flat or musty cushions need new foam, so diagnose before you spend.
  • Keep the frame when cushion work costs under about half of a comparable new set and the frame is rust-free and solid.
  • Custom refoam-and-recover work on a budget set can cost as much as a new one, so price ready-made replacement cushions first.
  • DIY covers on simple rectangular cushions cost noticeably less than a shop, but boxed, piped, or tufted cushions are worth hiring out.
In this guide
  1. What Does Patio Cushion Replacement Typically Cost?
  2. How Much Do Covers, Foam, and Labor Cost Per Part?
  3. What Pushes the Price Up or Down?
  4. Recover, Refoam, or Replace: Which Fix Fits Your Cushions?
  5. When Is Buying a New Patio Set Cheaper?
  6. How Can You Save on Cushion Replacement?
  7. DIY Cushion Replacement vs Hiring an Upholsterer

Much of the money in a cushion job goes to fabric, not foam, so settle which part actually failed before you shop. A flattened seat needs foam. A sun-bleached cover needs fabric. A cushion that's merely dirty often needs a bucket of soapy water, and that's a $10 fix instead of a $300 one.

What Does Patio Cushion Replacement Typically Cost?

Patio cushion replacement typically runs $25 to $80 for a dining chair seat cushion and $80 to $450 for a deep seating seat-and-back pair, with custom work at the top of that range.

Scale that to a set of four deep chairs and the spread gets wide. Ready-made replacement cushions run roughly $320 to $1,800 total, depending on fabric grade. Having a shop recover your existing foam runs about $640 to $1,760, and adding new foam to a custom job pushes it to about $960 to $2,560. That top figure overlaps with what a mid-range new set costs, which is why this decision deserves a calculator and not a gut feeling.

Per seat, three parts make up the bill: the cover fabric, the foam core, and the closure (a zipper or ties). Fabric is usually the biggest piece, foam comes second, and closures are small change.

How Much Do Covers, Foam, and Labor Cost Per Part?

Outdoor fabric typically runs $30 to $75 per yard, foam cores $15 to $120 each depending on size, and shop labor $40 to $100 per cushion.

ItemMaterialsLaborNotes
Foam core, dining seat (about 20x20x3 inches)$15 to $40$0 if DIYQuick-dry foam sits at the high end
Foam core, deep seat (about 24x24x5 inches)$50 to $120$0 if DIYThicker and denser costs more
Foam core, deep back (about 24x18x4 inches)$30 to $80$0 if DIYOften cut from a sheet
Outdoor cover fabric$30 to $75 per yardn/aA seat cover takes about 1.5 to 2 yards
Zipper or ties, per cushion$3 to $20IncludedHeavy-duty zippers cost more
Custom recover, existing foam, per cushion$40 to $120 fabric$40 to $100Total about $80 to $220
Ready-made dining cushion$25 to $80NoneStandard sizes only
Ready-made deep seating seat-and-back pair$80 to $450NoneFabric grade drives the spread
Custom foam and covers, 3-seat sofa (3 seat, 3 back)IncludedIncludedRoughly $700 to $1,900 total

Brand-name solution-dyed acrylic, the fabric category that includes Sunbrella, tends to sit in the upper half of the fabric range. Prices vary by region and shop, so treat every figure here as a planning range and get real quotes.

What Pushes the Price Up or Down?

Fabric grade, cushion shape, foam type, and custom-versus-stock buying are the four biggest drivers of outdoor cushion replacement cost.

Fabric matters most. Solution-dyed acrylic has the color running through the fiber, so it generally resists fading longer than printed polyester, and you pay for that. A solution-dyed polyester can be a smart middle choice for a shaded patio.

Shape comes next. A plain rectangle is cheap to sew. Piping, welting, box corners, tufting, round seats, and curved sectionals add labor hours quickly, and shops price accordingly.

Foam is the quieter variable. Standard polyurethane costs less but holds water. Paying more for quick-dry foam with an open-cell structure helps if your patio is uncovered and the cushions get rained on or hit by sprinklers. Expect the premium to run roughly $10 to $40 per seat.

Finally, count your cushions. Shops often quote per piece, and small orders can carry minimum charges, so a single replacement may cost nearly as much per cushion as a whole set.

Recover, Refoam, or Replace: Which Fix Fits Your Cushions?

Match the repair to the symptom: dirty cushions need cleaning, faded or torn covers need recovering, and flat or musty foam needs replacing.

  • Dirty only: If the fabric is intact and the color is even, scrub with mild soap, a soft brush, and water, then let it dry fully on edge in the sun. Cost: about $10 in supplies.
  • Sun-faded: Tug the fabric near a seam. If it tears or feels brittle, the fibers are shot and you need new covers. If it holds, you can live with the color.
  • Flattened: Press your fist into the seat. If it bottoms out or rebounds slowly, the foam is spent, and a fresh foam core under a decent cover is the fix.
  • Musty or stained inside: Foam that still smells after a full dry has held moisture. Replace the foam, not just the cover, and wear gloves and a dust mask when you handle it.

A faded cover over good foam is the most common case, and it's where recovering pays off most. If both parts fail, compare ready-made replacement cushions against a custom job before you call a shop. For standard sizes, ready-made usually wins on price.

When Is Buying a New Patio Set Cheaper?

A new set is cheaper when cushion work would cost more than about half of a comparable new set, or when the frame itself is failing.

That half-the-price line is our rule of thumb, not an industry standard. It holds up because cushions wear out again in a few years, and a frame you keep should have many years left to justify the spend.

Typical new-set prices run roughly $300 to $900 for a budget four-seat dining set, $800 to $2,500 for a mid-range four-piece deep seating set, and $2,500 to $8,000 or more for quality aluminum or teak. Run your numbers against the matching tier.

Here's how it plays out. A four-chair deep seating set with a solid cast aluminum frame might cost $960 to $2,560 to refoam and recover on a custom basis, while a comparable frame bought new could run $2,500 or more. Keep it. Now take a five-year-old steel set that cost $700 new. Custom cushion work could approach what the whole set cost, and even $400 in ready-made replacement cushions is already past the half-price line.

Check the frame before you commit. Look for rust bleeding through the finish, wobbly joints, cracked resin, brittle wicker, or soft spots in wood. Any of those turns a cushion refresh into money spent on something that's ending. Our guide to the best patio furniture material for your climate helps if you do end up buying new.

How Can You Save on Cushion Replacement?

The biggest savings come from replacing only what failed, buying standard sizes, and shopping end-of-season clearance for foam and fabric.

  • Test the foam before you buy anything. Plenty of cushions have good foam under a worn cover.
  • Replace seat cushions first. Backs generally take less wear and tend to outlast them.
  • Buy off-the-shelf sizes where you can. Custom sizing adds cost on every piece.
  • Watch for fall clearance sales on patio cushion covers and foam.
  • Choose solution-dyed polyester for shaded areas and save the premium acrylic for full sun.
  • Skip piping and tufting. A plain box cushion costs far less to sew.

Then protect what you buy. Storing cushions off-season extends their life, and our guide on how to store patio furniture for winter covers it by climate zone.

DIY Cushion Replacement vs Hiring an Upholsterer

DIY usually costs noticeably less than hiring out for simple rectangular cushions, but an upholstery shop is worth paying for boxed, piped, or tufted work.

For a DIY job, you need outdoor fabric, UV-resistant polyester thread (cotton thread breaks down in sun and moisture), a zipper, a heavy needle, and a sewing machine that can handle two to four layers. Foam cuts cleanly with an electric carving knife or a long serrated blade. Wrap it in polyester batting so the cover fills out smoothly, and cut the cover slightly snug. A simple seat cushion is a reasonable afternoon project for someone who has sewn before, and a full set fits in a weekend.

Hire out when the shape is complicated, when you want matching piping, or when you've never sewn through thick fabric. A shop has industrial machines and the pattern experience to avoid puckered corners. Expect labor of about $40 to $100 per cushion, plus fabric, and a wait of one to three weeks. Get two or three quotes, and ask whether the price includes foam, zippers, and a template fee.

Your next step: measure each cushion, do the press test on every seat, and price ready-made replacement cushions against one shop quote before you decide.

Questions people ask

How long do patio cushions usually last?

It depends on sun exposure, fabric, and storage. Cushions with cheap printed covers may look tired within a couple of seasons, while solution-dyed fabric over quality foam often holds up for several years. Storing them under cover in the off-season adds time.

Can I replace just the covers and keep the foam?

Yes, if the foam passes the press test and doesn't smell musty after drying. Recovering existing foam costs less than a full redo. Measure the foam, not the old cover, because covers often shrink or stretch.

Is quick-dry foam worth the extra cost?

For an uncovered patio, usually yes. It drains and dries faster than standard polyurethane, which lowers the odds of mildew inside the cushion. On a fully roofed porch the extra cost matters less.

How do I measure patio cushions for replacement?

Measure the foam core's width, depth, and thickness, and note any corner cuts, curves, or ties. For a seat in a frame, measure the seat opening too, since the cushion should fit it snugly. Take a photo of the old cover as a reference.

Can outdoor cushion covers go in the washing machine?

Some can, but check the care label first. Many outdoor covers are meant to be hand-scrubbed on the cushion, and machine agitation or a hot dryer can shrink the fabric or damage the zipper. When in doubt, use mild soap, a soft brush, and air drying.

Sources and further reading

Elsewhere in Outdoor Living