Best Plant Support for Peonies and Tall Perennials
A steel ring suits most peonies, while delphiniums want stakes. Here's how to size, price, and time the purchase.
Save to PinterestWe may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more
The short answer
For most clump-forming peonies, buy one sturdy steel ring or linking stakes about 18 to 24 inches across, with the top hoop 24 to 30 inches above the soil; expect to pay roughly $12 to $35. Use a grow-through grid for bushy mid-border perennials and individual 5 to 6 foot stakes for delphiniums. Install in spring when shoots are 4 to 8 inches tall.
- Typical cost
- $12 to $35 per peony ring; $3 to $12 per delphinium stake
- Time needed
- About 10 to 15 minutes per plant
- Skill level
- Beginner
Key points
- Size a peony ring to the clump: 18 to 24 inches across for a young plant, 24 to 30 inches for an old one.
- Height and leg strength matter far more than finials, color, or 'self-supporting' claims.
- Delphiniums have hollow stems and tall flower spikes, so individual stakes beat rings.
- Expect to pay roughly $12 to $35 for a solid peony ring, and skip the premium tier unless you want the look.
- Buy supports in fall if you like, but install them in spring when shoots are 4 to 8 inches tall.
In this guide
- Why do tall perennials flop?
- What features matter when choosing perennial plant supports?
- Which features don't matter much?
- How do rings, grids, stakes, and cages compare?
- How much should you spend on plant supports?
- What's the best plant support for peonies in a typical yard?
- When should you install peony supports?
- What mistakes should you avoid with plant supports?
The best time to support a peony is before it needs it. Set a sturdy steel ring over the clump in early spring, while the shoots are 4 to 8 inches tall, and the stems grow up through it and lean on it later. Delphiniums are the exception: skip the ring and use individual stakes.
Why do tall perennials flop?
Tall perennials flop because the flower heads get heavy faster than the stems stiffen, and rain or wind finishes the job. Double-flowered peonies are the classic case: a bloom loaded with rainwater bends its stem to the mud.
Delphiniums fail differently. Their stems are hollow and the plants can reach 4 to 6 feet, so they tend to snap in a gust instead of sagging. Rich soil, heavy nitrogen, and partial shade make either plant stretchier and weaker.
Support pays off most with double-flowered peonies, windy sites, shaded beds, and fast-growing young clumps. Single-flowered and Japanese-type peonies often stand on their own, and shorter cultivars may need nothing. If a plant stayed upright last year, don't buy anything.
What features matter when choosing perennial plant supports?
Four features decide whether a support works: height, mesh openness, diameter, and leg strength.
Height. The support should reach roughly two-thirds of the plant's mature height, so stems lean on it while the blooms rise above. Peonies often reach 3 feet or more, which puts the top hoop 24 to 30 inches above the ground. A shorter ring lets heavy heads fold over the top edge.
Mesh openness. A grow-through grid needs openings of roughly 5 to 8 inches so stems pass through without pinching. Tighter mesh traps emerging shoots and forces you to bend them to fit.
Diameter. A clump in its first few years usually fits an 18 to 24 inch ring. Older clumps often need 24 to 30 inches. Measure the spread of the shoots when they're about 6 inches tall, then go slightly wider.
Leg strength. Thin wire legs bend in clay soil and lean after the first storm. Look for solid legs you can press in without flexing, in powder-coated steel or galvanized steel, which resist rust better than bare wire.
Which features don't matter much?
Decorative finials, color, and labels like 'self-supporting' or 'no staking needed' don't change how well a plant holds up in wind and rain.
A ball-topped leg looks nice in October and disappears under foliage by June. Green coating blends in, but black or rust-brown does the same job once the plant fills out. Pay for the coating's durability, not its shade.
Any support only works if the stems grow through it early. A hoop installed after the plant has already flopped just holds up a pile of broken stems.
How do rings, grids, stakes, and cages compare?
Rings and linking stakes suit peonies, grids suit bushy mid-border perennials, and single stakes suit delphiniums and other spike-forming plants. The table compares types, not specific brands, and prices are typical U.S. ranges that vary by retailer and region.
| Type | Best for | Typical height | Main drawback | Typical cost |
|---|---|---|---|---|
| Peony support ring (single or two-piece) | Peonies, balloon flower, bushy asters | 24 to 30 inches | Fixed height on cheaper versions | $12 to $35 |
| Linking stakes | Irregular clumps, mixed borders | 18 to 36 inches | Needs several sets for a big clump | $12 to $40 per set |
| Grow-through grid | Dense mid-border plants such as phlox | 12 to 36 inches | Must go on before growth starts | $15 to $50 |
| Single stakes (bamboo, steel) | Delphiniums, foxgloves, lupines | 4 to 6 feet | Needs ties and patience | $3 to $12 each |
| Perennial support cage | Large, heavy peonies | 24 to 36 inches | Bulky and hard to store | $15 to $45 |
A peony support ring is the simplest option for a single clump. Use linking stakes when the clump is irregular or too wide for one ring, and a perennial support cage when the plant is big and floppy and you don't mind storing something bulky.
A grid fits better when a plant sends up dozens of thin stems, because the mesh holds each one. The ring wins for peonies with a few thick stems; the grid wins for plants with many thin ones.
What about delphiniums?
Delphiniums do best with individual stakes: 5 to 6 foot steel stakes or bamboo stakes, driven about 12 inches into the soil. Use three to five around each plant and tie the stems loosely about every 12 inches as they grow. Soft twine or stretch ties won't cut into hollow stems.
How much should you spend on plant supports?
Plan on $12 to $35 per peony for a support that should last many seasons, and don't pay more unless you want the look.
| Tier | Typical price per plant | What you get |
|---|---|---|
| Budget | $3 to $12 | Bamboo stakes with twine, or a thin coated-wire ring. Fine for light-duty plants, but wire rings often need replacing after a few seasons. |
| Mid-range | $12 to $35 | Solid steel ring or linking stakes, powder-coated or galvanized. This is the sweet spot for peonies. |
| Premium | $40 to $120 or more | Heavy-gauge steel, decorative finials, or hand-forged styling. Looks nicer but doesn't hold plants up better. |
Delphiniums need three to five stakes each, so budget $9 to $60 per plant depending on length and material.
What's the best plant support for peonies in a typical yard?
The best plant support for peonies in most yards is a mid-range steel ring or two-piece linking set, 18 to 24 inches across, with the top hoop 24 to 30 inches above the ground. We'd pick that over a grid or a cage because peony stems are thick and few, so a ring catches them at the right height without interfering with growth.
For a clump older than about five years, step up to a 24 to 30 inch ring or link two rings together. If the plant has flopped in past years, add a second hoop level so the stems get support at mid-height and near the top.
For mid-border perennials like phlox, asters, and tall sedum, a grow-through grid is the better pick. Set it a few inches above the soil and let the stems climb through it.
For delphiniums, buy stakes. Three to five 5 to 6 foot stakes per plant usually cost less than a premium ring and do a better job.
When should you install peony supports?
Install peony supports in early spring when the shoots are about 4 to 8 inches tall, not in fall. Fall is a fine time to buy, because stock is usually on shelves and you can measure last season's clump while you remember its size.
Timing depends on your climate. Shoots can emerge as early as March in warm areas or as late as May in cold ones, so check your zone on the USDA Plant Hardiness Zone Map and watch the plant itself. Your local Cooperative Extension office, through extension.org, can confirm local timing.
In fall, cut peony foliage to the ground after it yellows and mark the clump with a labeled stake. If the clump needs dividing, do it at the same time.
What mistakes should you avoid with plant supports?
The most common mistakes are installing too late, buying too small, and damaging the crown.
- Installing after the plant has already flopped, which bends and cracks stems.
- Choosing a ring that's too small, so the outer stems fall over the edge.
- Pushing legs through the crown. Peony buds sit just below the surface, so place legs just outside the clump.
- Using stakes that are too short. They need about 12 inches in the ground and should reach roughly two-thirds of the plant's height above it.
- Tying stems too tightly with wire or thin string.
Your next step: measure your biggest peony clump this week, write the diameter on a plant tag, and order a mid-range ring one size up before spring.
Questions people ask
Do all peonies need support?
No. Single-flowered and Japanese-type peonies, and shorter cultivars, often stay upright. Double-flowered types with big, heavy blooms are the ones most likely to flop after rain.
Can I use a tomato cage for peonies?
Yes, if it's sturdy. Choose a cage at least 24 inches tall and wide enough for the full clump, and set it early in spring. Flimsy cone-shaped cages tip over in wind and don't suit older, wider clumps.
What if my peonies have already flopped?
Don't force the stems upright, since they crack easily. In dry weather, gather them loosely with soft ties and slip a support around them, then plan to install earlier next spring.
Should I take supports off in fall?
You can leave steel rings in place until you cut the foliage back, then lift them out and store them dry. Removing them at cutback also keeps the metal from sitting in wet soil all winter.
Will metal supports hurt my plants in hot weather?
Not in ordinary garden conditions. Coated or galvanized steel is commonly used around perennials, and the foliage shades the metal as it grows. Just avoid tying stems tightly against bare metal.
Sources and further reading
- Cooperative Extension (extension.org) University-backed gardening advice, including local perennial care and timing
- USDA Plant Hardiness Zone Map Find your hardiness zone to estimate spring emergence timing
Was this article helpful?