Bathroom Vanity Replacement Cost in 2026: What You'll Pay
The cabinet is the easy number. Plumbing moves, countertops, and wall repairs decide whether you pay $600 or $6,000.
Save to PinterestWe may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more
The short answer
A same-spot bathroom vanity replacement typically costs $450 to $1,500 installed for a 30 to 36 inch vanity, and most 30 to 48 inch swaps land between $1,000 and $2,000. Moving the plumbing pushes the total to $2,300 to $8,000 or more. Repairs behind the old cabinet can add another $150 to $1,200.
- Typical cost
- $450 to $1,500 for a like-for-like swap; $2,300 to $8,000+ to relocate plumbing
- Time needed
- 4 to 8 hours for a same-spot swap; 2 to 5 days with plumbing moves
- Skill level
- Intermediate
Key points
- A same-location swap of a 30 to 48 inch vanity usually totals $1,000 to $2,000 installed, including the top and faucet.
- Moving the drain or supply lines is the biggest cost jump, typically adding $500 to $4,000 or more depending on distance and floor type.
- Budget $150 to $1,200 for repairs behind the old vanity, since walls, flooring, and subfloor often need work once it's out.
- Installing the vanity yourself can save roughly $200 to $800 in labor if the plumbing stays where it is.
- Leave any drain relocation, venting change, or corroded shut-off valve to a licensed plumber.
In this guide
- What does bathroom vanity replacement cost in 2026?
- How much does a vanity cabinet cost by size and material?
- How much do countertops and sinks add to the total?
- Why does moving plumbing double the bill?
- What hidden repairs show up behind an old vanity?
- How can you cut the cost without cutting quality?
- DIY vs hiring a pro: where does the line fall?
The vanity itself is rarely what blows the budget. A same-spot swap with a stock cabinet can finish under $1,000, while the same bathroom with a moved drain and a soft subfloor can pass $5,000. Use the ranges below to size up your bathroom vanity replacement cost before anyone shows up with a quote. They're typical 2026 U.S. figures, and they run higher in high-cost metro areas.
What does bathroom vanity replacement cost in 2026?
A like-for-like swap costs about $450 to $1,500 installed in 2026, and a full relocation runs $2,300 to $8,000 or more. The table splits materials from labor for five common jobs.
| Job | Materials | Labor | Typical total |
|---|---|---|---|
| Swap a 30 to 36 inch vanity, same spot | $250 to $1,000 | $200 to $500 | $450 to $1,500 |
| 48 to 60 inch vanity with stone top | $900 to $2,500 | $300 to $800 | $1,200 to $3,300 |
| 60 to 72 inch double vanity, semi-custom | $1,500 to $4,000 | $400 to $1,000 | $1,900 to $5,000 |
| Wall-mounted vanity with new blocking | $500 to $2,000 | $400 to $1,100 | $900 to $3,100 |
| Relocate sink to a new wall | $800 to $3,000 | $1,500 to $5,000 | $2,300 to $8,000+ |
Most people replacing a 30 to 48 inch vanity in the same spot land between $1,000 and $2,000 all in. Hold back another 10 to 15 percent for whatever turns up behind the old cabinet.
How much does a vanity cabinet cost by size and material?
A stock vanity of 24 to 30 inches typically costs $150 to $600, and prices climb with width, sink count, and how the box is built.
| Type and size | Cabinet price | What you get |
|---|---|---|
| Stock, 24 to 30 inches | $150 to $600 | Fixed sizes, limited finishes, top often included |
| Semi-custom, 36 to 48 inches | $400 to $1,800 | More door styles, colors, and drawer layouts |
| Double vanity, 60 to 72 inches | $900 to $3,500 | Two sinks, more storage, heavier to move |
| Custom-built | $2,500 to $6,000+ | Fits odd spaces, any finish, long lead time |
Construction matters more than door style. Plywood boxes tolerate splashes and humidity better than particleboard, which swells when water reaches the edges. A semi-custom vanity costs more than a stock vanity, and it's worth the premium if your wall width falls between standard sizes.
Labor for a straightforward same-spot swap typically runs $200 to $500 for two to four hours, a bit more for larger cabinets. Ask whether hauling away the old vanity is included.
How much do countertops and sinks add to the total?
A vanity top adds nothing extra if it's bundled with the cabinet, and $150 to $2,500 if you buy it separately, depending on material and sink style.
Three tiers cover most choices. Cultured marble and solid-surface tops with an integrated sink run about $150 to $500. A prefab quartz vanity top runs about $300 to $1,200. Custom-fabricated granite, quartz, or marble with cutouts runs $600 to $2,500 or more, plus a few weeks of lead time. Integrated sinks cost least and have no seam between bowl and top. Undermount sinks look cleaner but need a stone top cut to fit.
Budget $80 to $400 for a faucet, plus $20 to $60 for a new P-trap and braided supply lines. Don't reuse old rigid supply tubes or crusty fittings.
Why does moving plumbing double the bill?
Moving plumbing costs so much because the work happens inside the wall and floor, typically adding $500 to $2,500 for a short shift on the same wall and $1,500 to $4,000 or more for a different wall.
A plumber has to open the wall, reroute supply lines, set a new drain at the correct slope, and tie it into the vent. On a concrete slab, add cutting and patching the floor. Then comes drywall repair and paint. Many areas also require a permit and inspection, which adds fees and scheduling time.
A shift of a few inches can often be absorbed with an offset fitting. A shift of a foot or more often can't. That's how the same vanity ends up costing double or triple once the plumbing has to move.
If you're also changing the tub, lighting, or fan, do the plumbing move first so you don't pay twice for the same wall repair.
What hidden repairs show up behind an old vanity?
Hidden repairs typically add $150 to $1,200, and you won't know the number until the old vanity is out.
The usual finds are damaged drywall, missing or mismatched flooring where the cabinet sat, and water stains from slow leaks. Minor drywall patches run $150 to $400, and they're a reasonable DIY job. Flooring patches run $100 to $600, more if the flooring is discontinued and a larger section has to be replaced. Soft or stained subfloor is a bigger job and can add $300 to $1,200 or more if the leak has been running a while.
A floating vanity or a pedestal sink needs solid support behind the wall. If there's no wood blocking at the right height, a carpenter or plumber has to open the wall and add it, typically for $100 to $400. Skipping this step is a common reason wall-hung vanities pull loose.
Older homes add one more consideration. Paint in homes built before 1978 may contain lead, and old vinyl flooring or adhesive from before the 1980s may contain asbestos. If you plan to sand, scrape, or tear out either, read the EPA's lead guidance first. Contractors working in pre-1978 homes must follow EPA lead-safe work rules. If you suspect asbestos, have the material tested before you disturb it, and expect to hire a qualified pro if it's confirmed. Local rules vary.
How can you cut the cost without cutting quality?
The biggest savings come from keeping the plumbing where it is and buying a vanity that fits the existing space.
- Match the current rough-in. Measure the drain and supply locations and pick a vanity whose back panel or open interior clears them.
- Buy the vanity with the top included. A bundled set is often cheaper than a cabinet plus a separately bought top.
- Stay with standard widths. Stock sizes of 30, 36, 48, and 60 inches avoid custom pricing.
- Supply the vanity yourself. Some contractors mark up materials, so paying for labor only can help, though a few won't warranty customer-supplied products.
- Skip the second sink unless you need it. A double vanity costs more for the cabinet, the top, and the plumbing.
Replace the supply lines and shut-off valves while the cabinet is out. It's cheap now and costly later.
For most bathrooms, we'd pick a 36 to 48 inch semi-custom vanity with a plywood box and a prefab quartz vanity top, installed over the existing plumbing. That setup commonly lands near the $1,000 to $2,000 range and avoids both the custom-work premium and the risk of a plumbing move.
DIY vs hiring a pro: where does the line fall?
You can DIY a same-location swap if you're comfortable with basic plumbing, and you should hire a licensed plumber for any drain move, venting change, or corroded shut-off valves.
A first-timer needs four to eight hours and saves $200 to $800 in labor. You'll need a drill, level, stud finder, adjustable wrenches, a bucket, a caulk gun, shims, safety glasses, and gloves. The steps run in this order:
- Shut off the water at the shut-off valves under the sink and open the faucet to drain the lines.
- Disconnect the supply lines and P-trap, then unscrew and remove the old vanity.
- Patch the wall and floor, and locate studs for the new cabinet. Check for pipes and wiring before you drive screws.
- Set the new vanity, shim it level, and screw it to the studs.
- Install the top, faucet, and drain, then connect new braided supply lines and the trap.
- Run water, check every joint, and tighten as needed. Caulk the backsplash seam.
Hire out when the shut-off valves won't close or are corroded, when the drain is galvanized or leaking, when you want to move the sink, or when venting has to change. Call an electrician if outlets or lighting near the sink need to move or be upgraded, since bathroom circuits need ground-fault protection and the work may need a permit. A wall-hung or pedestal install that needs new blocking is also worth hiring out unless you're comfortable opening walls.
Before you sign with anyone, get written estimates and a written contract, and read the FTC's consumer advice on hiring contractors.
Your next step takes ten minutes. Measure the wall width, the drain height, and the supply locations, photograph the plumbing, and ask two contractors for quotes broken into materials, labor, and repairs.
Questions people ask
Do I need a permit to replace a bathroom vanity?
A straight swap in the same location usually doesn't need one, but moving drains, supply lines, or vents often does. Rules vary by city and county, so call your building department before starting any plumbing changes.
Is a floating vanity more expensive than a freestanding one?
Usually yes, because wall-hung cabinets cost more and the wall may need new blocking, typically $100 to $400. The wall has to carry the cabinet, the top, and a water-filled sink, so solid backing isn't optional.
Is a double vanity worth the extra money?
It is if two people use the bathroom at the same time and you have at least 60 inches of wall. A double vanity costs more for the cabinet, top, faucet, and drain, and in a smaller room a single sink with more counter space often works better.
Can I reuse my old faucet and supply lines?
You can reuse a faucet in good shape if its hole spacing matches the new top. Replace the supply lines and P-trap anyway, since they cost little and old connections are a common source of leaks after a swap.
Should I replace the whole vanity or just the countertop?
Replace only the top if the cabinet box is dry, solid, and the right size. If the box is swollen, smells musty, or has failing doors and drawers, replace the whole vanity, since a new top on a damaged base won't last.
Sources and further reading
- International Code Council Model codes that many local plumbing rules are based on
- EPA Lead (Renovation, Repair and Painting) Lead-safe renovation guidance for homes built before 1978
- FTC Consumer Advice Consumer advice on hiring contractors and reading contracts
Was this article helpful?