Paver Edging: Steel vs Plastic vs Concrete vs Stone Compared
Edging fails from side push, not looks. Here's how to pick one that holds on clay and frost-prone ground.
Save to PinterestWe may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more
The short answer
For a typical backyard patio on clay or frost-prone soil, choose steel edging about 3/16 inch thick and 4 to 5 inches tall, with 12 inch stakes spaced per the maker's instructions. Heavy plastic paver restraint with 10 to 12 inch spikes suits tight curves and tight budgets. Skip thin garden-style plastic with short stakes.
- Typical cost
- $1 to $8 per linear foot for strip edging; $10 to $40 installed for concrete or stone
- Time needed
- A few hours to one day for a typical patio
- Skill level
- Beginner
Key points
- Edging exists to resist sideways push from traffic, frost, and base spread, so judge it by anchoring and rigidity, not appearance.
- Stake length and spacing matter as much as the material: 10 to 12 inch spikes generally beat 6 inch stakes on any patio that gets walked on.
- Thin garden-style plastic landscape edging belongs around planting beds, not around a paver patio.
- Steel is the best default for a clay-soil backyard patio, heavy plastic handles tight curves, and a concrete collar is the permanent option.
- Expect roughly $1 to $8 per linear foot in materials for strip edging, and roughly $10 to $40 installed for concrete or stone.
In this guide
- What does paver edging actually have to do?
- Which features matter: height, anchoring, and stake length?
- Which features don't matter much: color and brand claims?
- Steel, plastic, concrete, or stone: how do the product types compare?
- How much does paver edging cost?
- Why does paver edging fail?
- What's the best edging for a standard backyard patio on clay soil?
- What should you check before you backfill?
Paver edging doesn't hold your patio up. It stops the pavers and the base beneath them from creeping outward, and that sideways push is what loosens joints, opens gaps, and slowly wrecks a patio that was laid well. Judge edging by how well it resists that push. Looks come second.
What does paver edging actually have to do?
Paver edging has to resist sideways force from three sources: foot and furniture traffic, freeze-thaw movement, and gradual spreading of the base. Any one is modest. Together, over a few winters, they can push the outer row of pavers out of line.
Traffic is the obvious one. Every step and dragged chair nudges the edge pavers outward, and a paver on bedding sand has only friction and the restraint to hold it. Frost is the second. Clay holds water, water freezes and expands, and the ground shifts a little each cycle. The third is quieter: a compacted gravel base with nothing confining it spreads at the margins and takes the bedding sand along.
A paver edge restraint keeps the pavers interlocked. Without one you have loose pavers on a pile of sand. Your frost depth and soil type set how hard the job gets, so check with your county building department or your Cooperative Extension office. For base depth specifics, see our guide to gravel base depth for a paver patio on clay and frost-prone ground.
Which features matter: height, anchoring, and stake length?
Three features decide whether edging holds: how well it is anchored, how rigid it is, and how tall it stands against the paver.
Anchoring and stake length. This is the big one. Spikes or stakes should reach well into the compacted gravel base and, ideally, the soil below it. Look for 10 to 12 inch spikes on anything that goes around a patio. The 6 to 8 inch stakes packaged with cheap strips hold in a flowerbed but tend to pull loose under a patio's sideways load. For plastic restraint, makers commonly call for a spike about every 12 inches on straight runs, with extra at joints and curves. Steel spacing varies by product, so follow the instructions and tighten up on curves.
Rigidity. A restraint that flexes when you lean on it lets the pavers flex too. Thicker steel and aluminum edging hold a line. Thin plastic bends, which is useful in exactly one place: a tight radius that stiff metal won't follow.
Height. The edging should be tall enough to back the paver's side and reach down along the base, yet sit at or just below the paver's top so it doesn't catch a mower or a bare foot. Steel edging commonly runs 4 to 5 inches tall, and pavers are typically about 2 3/8 to 3 1/8 inches thick, so match the two before you buy.
Which features don't matter much: color and brand claims?
Color, finish names, and marketing language rarely change how edging performs, because the edge is mostly buried once the patio is done.
Color alone doesn't change how plastic behaves. On steel, a galvanized or coated finish matters for rust, not looks. Phrases like commercial grade or never heave aren't standards. Judge a product by the numbers on the package: material thickness, height, stake length, and how many stakes come with it. If a listing won't give you those, assume the answer is unflattering. Brand matters mainly for convenience, since a known product is easier to find again if you need to extend the run.
Steel, plastic, concrete, or stone: how do the product types compare?
Steel is the best all-around restraint, heavy plastic is the flexible budget option, and concrete or stone are the permanent, higher-labor choices. The table compares types, not specific products.
| Type | Rigidity | Curves | Typical lifespan concern | Best for |
|---|---|---|---|---|
| Steel edging | High | Gentle curves only | Rust if not galvanized or coated | Most backyard patios and walkways |
| Aluminum edging | Medium to high | Gentle curves | Softer than steel, can dent | Rust-free alternative to steel |
| Heavy plastic paver restraint | Medium | Tight curves | Can flex or lift if spikes are short or spaced wide | Curved patios, budget jobs |
| Thin plastic landscape edging | Low | Any | Heaves and pulls loose under traffic | Garden beds only |
| Concrete collar | Very high | Any shape you can form | Can crack where it meets the base edge or frost moves it unevenly | Permanent edges, heavy use |
| Stone or cobble set in concrete | Very high | Good with small units | Cost and labor; joints can fail | Visible edges where appearance matters |
On steel vs plastic landscape edging, the gap is rigidity and anchoring. Steel holds a line because it doesn't flex easily and takes long stakes. Plastic can work well when it is a heavy paver-specific product with long spikes, and poorly when it is the thin rolled strip sold for lawns.
A concrete collar is a poured band, often 4 to 6 inches wide, set against the pavers' outer edge and over the base margin. It is strong and unforgiving. Where frost moves the base and the collar differently it can crack, so ask a local mason about control joints for your area. Poured concrete near a property line or structure can also trigger permit or setback rules in some towns, so call your building department before you form anything.
How much does paver edging cost?
Strip edging runs roughly $1 to $8 per linear foot in materials, and concrete or stone runs roughly $10 to $40 per linear foot installed. Paver edging cost per foot depends on material thickness, stake count, and, for the permanent options, labor.
| Tier | Typical cost per linear foot | What you get |
|---|---|---|
| Budget | $0.75 to $2 | Thin plastic strip with short stakes. Fine for planting beds, a poor fit for patios. |
| Mid-range | $2 to $5 | Heavy plastic paver restraint with 10 to 12 inch spikes, or lighter-gauge steel or aluminum. |
| Upper | $4 to $8 | Heavy-gauge steel or aluminum, taller profile, longer stakes. |
| Permanent | $10 to $40 installed | Concrete collar or stone set in concrete, driven by labor, forming, and stone choice. |
A 12 by 16 foot patio has about 56 feet of perimeter. At the top of the strip range that's roughly $450 in edging, a small slice of the project budget, so skimping here saves little and risks a lot. Prices vary by region and supplier.
Why does paver edging fail?
Paver edging mostly fails because the anchoring was too light for the load: short stakes, wide spacing, or flexible material pulled outward by frost and traffic.
The classic case is thin plastic landscape edging used around a patio. With 6 inch stakes, frost can lift it, and wet clay lets the stakes work loose. The edge pavers lean out and the joints open. Spikes driven into fresh, uncompacted fill fail the same way because they have nothing to bite on. A restraint that doesn't sit snug against the pavers leaves room for movement, and movement is all it takes.
Fixing it later means pulling the edge pavers, re-compacting the base margin, and resetting the restraint with longer anchors. Buying the right product first is far cheaper.
What's the best edging for a standard backyard patio on clay soil?
For a backyard paver patio on clay or frost-prone ground, we'd pick steel edging about 3/16 inch thick and 4 to 5 inches tall, with 12 inch stakes.
Clay and frost produce the strongest sideways forces, and steel resists them best at a reasonable price. It holds straight lines, follows gentle curves, and takes long stakes that reach below the base. Go with galvanized or coated steel so rust doesn't streak the visible edge.
Switch to a heavy plastic paver restraint where the patio has a tight radius steel won't follow. Pick products with 10 to 12 inch spikes and space them at the manufacturer's interval or closer. A concrete collar makes sense if you want a permanent edge, if the area gets heavy loads, or if you're already pouring concrete nearby.
Skip thin plastic landscape edging for the patio itself and save it for the garden beds beside it. If the patio is part of a bigger plan, our backyard landscape design planning steps show where edging fits in the sequence.
What should you check before you backfill?
Before you backfill, confirm that the restraint is snug against the pavers, anchored through the base, and set at the right height, because it's much harder to fix once the soil is in.
- The edging sits on the compacted gravel base, not on loose bedding sand.
- Every stake is fully driven, with no wobbling spikes, and spacing matches the instructions.
- Joints between sections overlap or use the supplied connectors, with no gaps.
- The top of the edging sits at or slightly below the paver surface.
- Curves are smooth, with extra stakes at each bend.
- Pushing on the outer pavers moves nothing. If something shifts, add anchors now.
Once it passes, backfill soil or gravel against the outside of the edging and tamp it lightly, then sweep in polymeric sand. If you're racing the first frost, our fall hardscaping checklist shows what to finish first. Your next step: measure the perimeter, add 10 percent, and price steel against heavy plastic with the stake length written down.
Questions people ask
Do I need paver edging where the patio meets the house?
Often not. A foundation wall or an existing slab already blocks outward movement. You still need restraint on every open side, and it's worth checking that the house side has no gap or soft spot where pavers could slide.
Do I still need edging if I use polymeric sand?
Yes. Polymeric sand stiffens the joints between pavers but does nothing to hold the perimeter. Without restraint, the outer pavers and the base can still spread.
Can I use landscape timbers or bender board as a paver edge restraint?
They can work for light-duty areas, but wood can rot or shift in wet clay and rarely matches the grip of steel or heavy plastic. For a patio that gets regular use, a purpose-made product is the safer choice.
Should paver edging be installed before or after the pavers?
Most installers set the restraint after laying the pavers and cutting the edge pieces, then spike it tight against them. Some set it first as a guide. Either way, it must be fully anchored before you sweep in polymeric sand.
Will steel paver edging rust?
Bare steel will. Galvanized or coated steel resists rust much longer, though cut ends and scratches can still show some. Aluminum doesn't rust but dents more easily.
Sources and further reading
- 811 Call Before You Dig Free utility marking before you drive stakes or dig.
- Cooperative Extension (extension.org) Local guidance on soil type and frost conditions.
Was this article helpful?