Fix and Furrow
Advertise

Part of our Painting and Flooring guide

Floor and Decor Flooring Prices: The Real Cost Per Square Foot

The shelf tag covers the planks or tile only. Here's how waste, prep, trim, and labor turn it into a project total, with a DIY break-even check.

Save to Pinterest

We may earn a commission when you buy through links on this page. It never changes what we recommend. Learn more

Empty open-plan room with light wood-look vinyl plank floor running toward a modern kitchen with wood cabinets
Photo: Steven Ungermann on Unsplash

The short answer

Expect roughly $4 to $13 per square foot all-in for luxury vinyl plank or laminate, $9 to $25 for hardwood, and $10 to $30 for tile once you add about 10 percent waste, prep, trim, and installation. The shelf tag alone, typically $1.50 to $12 depending on type, covers material only.

Typical cost
$4 to $30 per square foot installed, depending on flooring type
Time needed
Two to three weekends for a 600-square-foot DIY floating floor; a week or more for tile
Skill level
Intermediate

Key points

  • Shelf prices cover material only, so a realistic all-in budget often runs two to three times the tag price.
  • Buy 10 percent extra for straight layouts and 15 to 20 percent for diagonal or herringbone patterns, and keep a spare unopened box for future repairs.
  • Labor is the biggest swing: luxury vinyl plank and laminate installs run about $2 to $5 per square foot, while tile often runs $6 to $15.
  • DIY makes sense for floating vinyl or laminate over a flat subfloor, but tile and nail-down hardwood usually justify hiring a pro.
  • Old floors and paint can hide lead dust or asbestos, so test before you tear anything out of an older house.
In this guide
  1. What does the Floor & Decor price tag cover?
  2. How much do Floor & Decor prices run by flooring type?
  3. What extras should you add before you budget?
  4. Should you pay for installation or do it yourself?
  5. What pushes your total up or down?
  6. How can you save without buying lower-grade flooring?
  7. What does a 600-square-foot project cost, start to finish?

The tag on the shelf is the easiest number to find and the least useful one for budgeting. A box of luxury vinyl plank priced at a few dollars per square foot usually becomes a project that costs two to three times that once you add waste, prep, trim, and someone to lay it. The ranges below are typical U.S. figures for 2026. Store pricing, sales, and your local labor market will move them.

What does the Floor & Decor price tag cover?

The tag covers the flooring material only, priced per square foot of what's in the box. It leaves out removal of the old floor, subfloor repair, underlayment, adhesive or thinset, trim, transitions, delivery, and labor.

Whether a given store can refer you to installers varies by location, so ask before you plan around it. Either way, get the quote in writing and compare it with what an independent crew would charge.

Online room calculators are handy for converting dimensions into boxes. Check whether the number includes waste, because skipping that is how people end up one box short on a Saturday afternoon.

How much do Floor & Decor prices run by flooring type?

Material runs about $1.50 to $12 per square foot depending on type, and the installed total lands between roughly $4 and $30.

Flooring typeMaterial (per sq ft)Installation labor (per sq ft)Extras and prep (per sq ft)Typical all-in (per sq ft)
Luxury vinyl plank$2 to $6$2 to $5$0.50 to $2$4.50 to $13
Laminate$1.50 to $4$2 to $5$0.50 to $2$4 to $11
Porcelain tile$2 to $10$6 to $15$2 to $5$10 to $30
Engineered or solid hardwood$4 to $12$4 to $10$1 to $3$9 to $25

Compare luxury vinyl plank against laminate flooring and the gap in material cost is small. The wear layer, core type, and water resistance are what you're really paying for. Vinyl handles spills and pets better, which matters in kitchens, and we cover that tradeoff in our engineered hardwood versus luxury vinyl plank comparison for a dog kitchen.

Tile swings the widest. Basic porcelain tile sits at the low end, while large-format tile or natural stone pushes material up and makes labor pricier, because big pieces need flatter floors and more careful setting. Unfinished solid hardwood is cheaper on the shelf but needs sanding and finishing, which can add roughly $3 to $8 per square foot.

What extras should you add before you budget?

Add 10 percent for waste on straight layouts, then price underlayment, setting materials, trim, and transitions on top. Each is small alone. Together they commonly add $0.50 to $5 per square foot.

  • Waste allowance: 10 percent for straight-lay vinyl, laminate, and tile; 15 to 20 percent for diagonal tile or herringbone; about 5 to 10 percent for hardwood, depending on how much of each board you can use.
  • Underlayment: Many vinyl and laminate planks have a pad attached. If yours doesn't, expect about $0.30 to $1 per square foot. Over a questionable subfloor, self-leveling underlayment can add $1 to $4 per square foot.
  • Tile setting materials: Thinset mortar, grout, backer board, and sealer typically run $1 to $3 per square foot together.
  • Trim and transitions: Plan on $15 to $60 per doorway for transition strips, plus quarter round or new baseboard if the old pieces crack coming off.
  • Removal and disposal: Pulling carpet or old flooring commonly costs $1 to $3 per square foot if you hire it out.

Should you pay for installation or do it yourself?

DIY is realistic for floating vinyl or laminate over a flat subfloor and saves about $2 to $5 per square foot, but tile and nail-down hardwood usually pay for a crew in avoided mistakes.

A floating floor needs a saw for cuts, a jamb saw for door casings, a tapping block, spacers, and a pull bar. That kit costs roughly $75 to $250 to buy, or less to borrow. A confident beginner can finish a 300-square-foot room over a weekend. Concrete slabs add a moisture question, so read our guide to installing luxury vinyl plank on concrete without buckling first.

Tile is a different animal. You need a wet saw, trowels, a leveling system, and patience, and a bad flat spot shows up as a cracked tile a year later. If you're tiling over plywood, read about tile over plywood subfloor mistakes before you decide. We'd DIY the vinyl and hire out the tile.

For any floor installation, expect a minimum job fee and extra charges for stairs, diagonal patterns, and moving furniture. Get at least two written quotes that separate labor, prep, and removal so you can compare them line by line. Flooring replacement rarely needs a permit, but condo and HOA rules on underlayment sound ratings are common, so check before you buy.

What pushes your total up or down?

Subfloor condition, layout, pattern, and your local labor market move the total more than the brand of flooring does.

Flatness is the big one. Tile and rigid vinyl need a flat surface, and leveling a dipped slab or sagging plywood can add hundreds or thousands of dollars. Lots of closets, angles, and doorways raise waste and labor time. Diagonal, herringbone, and mixed-size tile layouts do the same. Installer rates in large metro areas can run well above rural rates, and stairs are usually priced per step.

If you pull up the old floor and find soft, stained, or sagging subfloor, stop and have a licensed contractor look at it. That can point to a leak or a structural problem, and new flooring will only hide it.

Moisture limits your options too. Basements and slab floors rule some products out, which is covered in our piece on the best flooring for a damp basement.

How can you save without buying lower-grade flooring?

The safest savings come from timing, accurate measuring, and doing the easy labor yourself, not from dropping to a thinner wear layer. Cheap material on a bad subfloor is the most expensive combination.

  • Measure twice, then add only the waste you need.
  • Watch for clearance or closeout stock, but make sure you can buy enough for the whole room from one lot.
  • Do your own demolition and haul-away if the floor is safe to remove.
  • Run the same flooring through adjoining rooms to cut transitions and share waste.
  • Don't stack a second pad on planks that already have one unless the manufacturer allows it, and read the instructions so you don't void the warranty.

What does a 600-square-foot project cost, start to finish?

A 600-square-foot luxury vinyl plank project at a mid-range price costs roughly $6,000 installed, or about $10 per square foot, and roughly $3,000 to $3,200 if you do the work yourself. This example assumes planks with a pad attached, a $3.50 per square foot material price, and 10 percent waste.

Line itemHired crewDIY
Flooring (660 sq ft at $3.50)$2,310$2,310
Trim and transitions$250$250
Old floor removal$900$0 (your time)
Subfloor prep allowance$400$400
Installation labor (600 sq ft at $3.50)$2,100$0 (your time)
Tool kit or rental$0$75 to $250
Total$5,960$3,035 to $3,210

Hired out, that's about $9.93 per square foot against a shelf price of $3.50. DIY saves roughly $2,750 to $2,925 here.

The break-even is simple. Divide the savings by the hours you'll spend, likely two to three weekends including demolition. If the result beats what your time is worth, do it yourself. If your subfloor is uneven, or you'd rather not gamble on a warranty, pay the crew.

Your next step: measure each room, run the numbers through the tables above with a 10 percent waste factor, and get two written installer quotes before you buy a single box.

Questions people ask

Do I need to acclimate flooring before installing it?

Many manufacturers call for it, especially for hardwood and laminate, which can expand or shrink with humidity. Typical guidance is 24 to 48 hours in the room, but follow the instructions for your specific product, because some lines differ.

Is a thicker wear layer worth paying for?

For busy kitchens, entryways, and homes with pets or kids, a thicker wear layer usually justifies a modest price bump because it resists scratches longer. In a guest room or other low-traffic space, a thinner layer is fine and saves money.

Why keep an unopened box after the job is done?

Dye lots and product lines change, so a matching plank or tile can be hard to find later. Store the box flat in a climate-controlled spot so it matches the installed floor when you need to swap out a damaged piece.

How do I compare Floor & Decor prices to other stores?

Compare the same specs: wear layer thickness, core type, plank size, warranty, and whether a pad is attached. Then compare the price per square foot of the whole box, because a lower tag on a thinner product isn't actually cheaper.

Can I get a free installation estimate?

Many flooring installers and some stores offer free estimates, though fees and policies vary. Ask what the estimate includes, since a firm quote typically requires an in-home measure and a look at the subfloor.

Sources and further reading

Elsewhere in Home Improvement